Jump to content
SAU Community

Recommended Posts

Hey Guys...

I have decided to sell one of my Stagea's! My Black S2 RS4 (NEO 25)... Reason for sale, i am chasing a Patrol preferably & the other Stag is a RSV which i would prefer to keep out of the two due to it being a RWD model. Genuine Sale!!

Its actually a Dayz edition im sure but currently has a standard S2 front bar, so has a few extra goodies so to speak of. Has about 130,000kms on the clock & all the typical options you'd expect from a S2 Stag! Power options, privacy glass, ABS, tiptronic trans, 206KW RB25 turbo, blah, blah, blah lol... Has 6 months rego though could do with some new tyres as they have been on there for quite some time now!

Is a daily transporter with no problems, great mechanical & top reliability you can trust from a Nissan though it does have a few blemish's you would expect from a daily such as a few rub marks / scruffs on the front & back bars and it could do with a polished here & there but still present well with nice straight lines!

Price & Location: $8250, Western Sydney!!

Will have some pictures up soon, am currently interstate & am open to swaps as we are chasing a 4x4 or another S13 / R32 perhaps??

Regards, Matt.

Link to comment
https://www.sau.com.au/forums/topic/410339-fs-black-c34-s2-stagea/
Share on other sites

Hi mate, PM your number & i'll send you some pics!

Need to sell this peeps so if anyone else is interested PM me your numbers & i'll do the same... Willing to negotiate a price as it does need some TLC! Its not perfect on the cosmetic side of things so to speak of so i'll take $7000! Still open to swaps as well.

Cheers, Matt.

Hi mate, not really after a Civic! Like my Nissans! But thanks anyway!!

We're chasing something like a Patrol or perhaps another R32 or another Silvia/180SX even, though a Boat would be acceptable as well as we are currently in the market for a cheap one.

Anyways, managed to get some pics together as requested. Found a few on my computer so will get some more together when i get back to Sydney! Cheers!!

76602243inleo.jpg

52889890.jpg

30498998.jpg

Edited by Dr Tuning
  • 2 weeks later...

Guys, i find this really hard to say but i need this gone ASAP! $6500 or $6K this week only! Absolute lowest i will go! Didn't think it would come to this :(

I know right.. Its a bargain!!

The only thing wrong with it is the paint could do with some TLC in a few places! My guess is, people dont have the money i take it.. I need the money lol.. Hence the price! I'd snap it up myself if things were the other way around.

Well, i still need the money so if anyones keen for a cheap S2 Stagea, you know where to find me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...