Jump to content
SAU Community

Recommended Posts

Hi all,

I'm upgrading my setup(again) so my old setup has to go unfortunately.

Up for Sale is my Bilstein/Nismo setup. I rebuilt all the shocks about 40K-50K ago keeping the same rates. This suspension is a great all round setup for any surface be it track, country road or dirt road.. The fronts also have adjustable height.

This is a simple bolt up and go setup with an awesome ride hence the reason I have had it for so long.....not to hard and not to soft.....it will suit any model of the NM35 or PNM35.

I'm asking $650 without shipping.

Photo's below show the ride heights.....as you can see its not stupidly low.

post-37023-0-90219300-1349850192_thumb.jpg

post-37023-0-51255400-1349850229_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/411249-nm35-nismo-bilstein-suspention/
Share on other sites

Have driven/ridden in this car, and can say its a great upgrade and well matched with the Nismo springs.. Not harsh at all, but firm and controlled. Will make a great upgrade for someone.

Man if I didnt have rego and need a new exhaust this month I would ve all over this.

I'm hearing yah!....been there

FYI.....I've organised fitment for $100 in Vic with Scoot for the Vic people.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...