Jump to content
SAU Community

Recommended Posts

Hey guys,

Had a mishap at paintball on the weekend and dislocated my ankle and fractured the fib.

I've got a plate and some screws and am currently laid up, working from home on the recliner.

My first appointment with the fracture clinic is this Monday where they will assess it, put a proper/full cast on it if the swelling has stopped, and give me some details on where we go from here.

I realise this is a 8-12 week injury and that it will take quite some time before I have full usage. I've been told NO weight bearing on that leg for at least 8 weeks. Oh and no driving... Given I'm 30, I don't expect a miracle 4 week recovery or anything like that.

In the meantime, I don't want to fall off the wagon too much in terms of the rest of my exercises.

I'm expecting at least 2 weeks of doing nothing to allow the swelling to subside from surgery and to allow that wound time to seal up a bit.

After that, I'm thinking that I could at least be doing some exercise to try and not lose too much strength in other unaffected areas, chest, bi's tri's etc.

Has anyone had first hand experience with this sort of thing or is anyone here a Physio that can comment? I'll ask at the clinic as well but the more info the better.

I've got free weights at home, and a bench press and have already discussed with the missus about possibly stacking the bar for me.

I'm old enough now to listen to my body and not to rush things so I won't be going crazy trying to push heaps of reps or weight, my main focus is to get the ankle/leg better and to try and minimise as much muscle loss, and keep fat down, as possible.

At present, I'm 6ft, 84kg, 12% BF on one of those cheapo electric home scales if that helps, nothing special I know, but it's taken me a little while to get back here after some gym related injuries and I don't want to go any further backwards than I have to.

Obligatory pic. Possibly more to come.

post-23873-0-44839100-1350439119_thumb.jpg

Edited by ActionDan

ho...ly...shiiit

where you playing indoor or outdoor paintball? I've played both and the indoor was ridiculous... there was so much paint on the floor it was like ice it was that slippery... a mate twisted his knee pretty badly

I have no experience other than a broken elbow but for what its worth...

a break is a break, you have to wait for the bone to knit back together or your going to have all sorts of problems

its not worth damaging your leg permanently

that being said you can probably do quite a few exercises... bench press, bench rows, pull ups, dips, push ups, seated overhead press, seated curls, seated skull crushers... however on all these exercises I would put your leg up on a box or similar... layed on it supported by your calf, NOT sole down if that makes sense... as even though your sitting on a bench you will still put weight through your leg if the sole of your foot is on the floor

Outdoor, sprinting for cover during the last game where the buck had to cross the firing line, we had paintballs left so he did it again but chose his 3 groomsmen to come with him (I'm the best man in the wedding which is 3-4 weeks away, should be fun on crutches). So I was sprinting and put my left foot too close to a little gulley/creek (less than a meter deep) and the ground gave out, when I put my right foot down, shit got real and I cratered into the little gulley thing. Good times...

Yeah I plan on having a chair/box I can rest the leg up on so the foot is not on the floor. I realise it will take some power out, but that's cool.

Are you sure you only broke your fibula? You can walk on your leg usually with a fractured fibula.

The dislocated ankle might be making it look like you broke your tibia as well...

Edited by Mitcho_7

I dislocated my ankle and tore 4 of its ligaments a few years back, so it's a bit different to having a fracture in there as well - that would be the main worry with any exercise, regardless if it's a complete fracture or hairline etc. You should be alright with most upper body exercises - just be sure of your balance as you could use the bad foot in a reflex if you aren't properly careful (as I did - it hurts!).

Also if you're sitting around a lot it would be worth having a look at basic range-of-motion exercises for your back and upper body as well as knees/hips if you can. And with the upper body work you can use much lighter weights and use it as more of a cardio exercise than for muscle.

Try and work your other leg a bit, though crutches will also give you a bit of a work out and the sole use of one leg will help it, the leg that won't be being used will be a fair bit skinnier in 2 months time!

I think just try out your exercises in a couple of weeks and find the ones you're most comfortable with and go from there. Sounds like you may get a full cast which is more intrusive I guess, I had a back slab of plaster down my calf and under my foot so I could shower without it when it eventually didn't hurt to try and remove - this also allowed me to get into a pool after about 6 weeks - lots of exercises can be done there particularly holding a board with your thighs to prevent any other leg movement.

Definently a rough looking dislocation!

I didn't mean you can walk around like nothing has happened with a fractured fibula, but people have been known to fracture it and not even know. Definently not good for the healing process!

Edited by Mitcho_7

I've had some really bad ankle sprains playing basketball and they HURT... ankle swells up like there is a tennis ball in there and its all colours of the rainbow... but that looks like nothing I've seen before... the pain must be severe!

so you rolled it the other way, onto the inside of your ankle? usually they go the other way, onto the outside

No it rolled outside, that lump you see is the Tibia with the foot having rotated almost 90 degrees clockwise when looking down on it.

I found out last night I actually have 7 small screws and one large one that goes through to the Tib to lock the whole thing in place, looks pretty crazy in there.

What can be done diet wie to maintain the muscle mass? Just protein? I use Dymatize Elite Fusion 7, it's a blended protein more aimed at recovery. I'm just having a half serve daily at the moment while I try and work out what to do. I'm trying to avoid high fat/sugar foods as I'm so inactive to hold off the fat build up also.

Here's some pics from the clinic, cast was too tight so they gave me a new one and I took the opportunity to get some snaps.

post-23873-0-25150900-1350523493_thumb.jpgpost-23873-0-05806200-1350523503_thumb.jpgpost-23873-0-97218100-1350523511_thumb.jpgpost-23873-0-92413700-1350523521_thumb.jpg

No it rolled outside, that lump you see is the Tibia with the foot having rotated almost 90 degrees clockwise when looking down on it.

riiight... I just ate lunch... and it almost came back up lol

you did a very good job of that... no half assed ankle sprains for you!

Honestly, I'm a bit pissed. I cover 90-100ks a month of running/walking, not to mention the incidental amounts from Gym, work, daily movement etc Plus I do a little bit of leg exercise so I would have assumed my shit was more resilient than this. It was very disappointing to realise the extent of the injury and how long I'd be out for.

But enough woah is me. How do I maintain what's still there?

A guy at work has a small under desk mini exercise bike. I thought I could borrow that and use it with my arms for some cardio too.

What's the best approach with protein and avoiding muscle mass depletion?

Edited by ActionDan

As for exercise. My Surgeon had this to say.

Go as hard as you like so long as you're not putting ANY weight on the broken leg.

So after two test sessions I've found I can, with the aid of a chair for either propping the leg on or sitting on, bench at full weight, ezy bar curl with reduced ROM as I'm sitting, still do dips, abs, hammer curls (sitting), military press (sitting) and can do one legged squats, calf raises on the good leg and do some leg extensions from the knee on the bad leg.

He said all of this is fine, there's also literature to support that working the good leg partially translates to the bad so hopefully atrophy will be reduced on that leg.

All in all, enough to keep me going for now. He did say that it would be quite some time before I had 100% no holds barred use of the broken leg, up to a year depending on my commitment.

By that he means, 100% sprinting, turning, pivoting, lifting etc without a second thought. He said I should have fairly full usage of it well before that, but that it takes quite some time before you can really forget about the injury sustained.

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...