Jump to content
SAU Community

Recommended Posts

Hi Guys,

We are proud to announce we are the Sole Distributor of [Concave Concept Wheels], we'll let the rims speak for itself.

CC002-Twin 6 Spoke

DSC_0616_zps593be3b5.jpg

DSC_0617_zpscbc918af.jpg

DSC_0611_zps7f661610.jpg

DSC_0620_zps2a983ce2.jpg

Concave: Medium

Size: 18x8.5

Offset: +19

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: EVO 5-10, all skylines Honda's...

Cost: $275each

Concave: Deepest

Size: 18x9.5

Offset: +15

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: EVO 10, all Skylines w BBK, Honda's...

Cost: $300each

CC003-Twin 5 Spoke

DSC_0615_zps1439ef7c.jpg

DSC_0613_zpsfc82ac70.jpg

DSC_0624_zps74ee7973.jpg

Concave: Medium

Size: 18x9

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's, All Nissans (R32&R33 GTST will require 5mm slip on), Honda's...

Cost: $300each

CC003-Twin 5 Spoke

Concave: Deepest

Size: 18x10

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's (X will reuire 3mm slip on), All Nissans (R32&R33 GTST will require 3mm slip on), Honda's...

Cost: $325 each

CC003-Twin 5 Spoke

Concave: Super Deep

Size: 18x11

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's, All Nissans, Honda's...

Cost: $375each

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...