Jump to content
SAU Community

Recommended Posts

Hi Guys,

We are proud to announce we are the Sole Distributor of [Concave Concept Wheels], we'll let the rims speak for itself.

CC002-Twin 6 Spoke

DSC_0616_zps593be3b5.jpg

DSC_0617_zpscbc918af.jpg

DSC_0611_zps7f661610.jpg

DSC_0620_zps2a983ce2.jpg

Concave: Medium

Size: 18x8.5

Offset: +19

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: EVO 5-10, all skylines Honda's...

Cost: $275each

Concave: Deepest

Size: 18x9.5

Offset: +15

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: EVO 10, all Skylines w BBK, Honda's...

Cost: $300each

CC003-Twin 5 Spoke

DSC_0615_zps1439ef7c.jpg

DSC_0613_zpsfc82ac70.jpg

DSC_0624_zps74ee7973.jpg

Concave: Medium

Size: 18x9

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's, All Nissans (R32&R33 GTST will require 5mm slip on), Honda's...

Cost: $300each

CC003-Twin 5 Spoke

Concave: Deepest

Size: 18x10

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's (X will reuire 3mm slip on), All Nissans (R32&R33 GTST will require 3mm slip on), Honda's...

Cost: $325 each

CC003-Twin 5 Spoke

Concave: Super Deep

Size: 18x11

Offset: +20

Colour: Gloss Bronze, Matt Black, Dark Gunmetal

Fitment: No EVO's, All Nissans, Honda's...

Cost: $375each

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...