Jump to content
SAU Community

Recommended Posts

CC03 Front 18x9+20 (5mm slip on) Rears 18x10+20

CC02 Front 18x8.5+19 Rears 18x9.5+15 (no problems running 9.5 all round)

DSC_0905-1.jpg

DSC_0902-1.jpg

DSC_0889.jpg

DSC_0888.jpg

DSC_0886.jpg

DSC_0899-1.jpg

DSC_0896.jpg

DSC_0894.jpg

DSC_0892.jpg

Tyres sizes on the 8.5 and the 9.5 +15?

Im keen for a set, might have to be after xmas though :(

  • 4 weeks later...

Where are they made. Steel or alloy. Cast or forged. Weight. Can you point me to the site with all the info. Thanks mate

There cast alloy. Weight for a 18 by 8.5 was around 22lbs so roughly 10kg.

Google COSMIS wheels.

We're making 19's and here is the 3D drawing of the 19x9.5

CC031995-201301171-1_zpsaa640628.jpg

We will be making the following size and offsets, currently taking per-orders due to arrive about 2-3months. We can drill to your spec and offsets and colours are Flat Black and Silver with a Polish face.

19x8.5 +22-38

19x9.5 +22-35

  • 6 months later...

Will the CC03's 18x11 +20 fit on a R34 rears and 18x9 +20 on the fronts. Guard flaring or pumping is not an issue and I'd run spacers if necessary.

Not sure on the rears, the fronts are fine. The 10's is a safer option...

No spacers required to clear the brakes, the new stock has been redesigned to clear Nissan 4 pots, and brembos. It made to clear almost all brake kits. It now even clears Evo 5-10 too...

  • Like 1

Nice, I Would also be interested in some 17's :)

If you end up getting them done.

And sorry but could anyone PM me about what pods these are!!:/

DSC_0667.jpg

Edited by Zrobe



  • Similar Content

  • Latest Posts

    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
    • So 10/10 times that code is coil packs? I mean if that's the case ill drop the $400USD or so to replace them. I didn't know these cars threw codes before the issue became an issue.
×
×
  • Create New...