Jump to content
SAU Community

Eoi - Cusco 5 Point Roll Cage (Half Cage)

Frosty
 Share

Recommended Posts

Frosty Grand Master

Frosty

Posted
  • Author
Posted

Location?

Central Coast NSW

Would u b interested in swaps for a set of recaro sr3 with recaro rails? Im in newcastle. Send me a message on 0401631925 if your interested?

nah im already running a pair of Bride Gias II

ISLIDE013 Community Regular

ISLIDE013

Posted
Posted

No Japanese bolt in cages are cams approved due to the thickness of the main hoop.

Must be 44.45mm thick (if I remember correctly)

Can easily be changed.

That's the only thing for a cage you need basically

Calsonic14U Mentor

Calsonic14U

Posted
Posted

cheers slide, looking to do wakefield track days in my track 32 just dont have the 3000 i need for a decent weld in job yet. So this was my next alternative. Good to see its a sun roof model so will fit mine :)

Frosty Grand Master

Frosty

Posted
  • Author
Posted

No Japanese bolt in cages are cams approved due to the thickness of the main hoop.

Must be 44.45mm thick (if I remember correctly)

Can easily be changed.

That's the only thing for a cage you need basically

i can certainly take measurments incase it has been changed. It was in my car when i bought it. Havent been into the whole track thing for some time so unsure of the measurements/specs any more

cheers slide, looking to do wakefield track days in my track 32 just dont have the 3000 i need for a decent weld in job yet. So this was my next alternative. Good to see its a sun roof model so will fit mine :)

cal the car is an ex drift car so should be no issues on the track :)

  • 1 month later...
ISLIDE013 Community Regular

ISLIDE013

Posted
Posted

Yeah calaonic

The rules here in Victoria recently changed due to an accident resulting in injury on the track so the jap cages are worth nothing here anymore and everybody has gone custom weld on cage jobs.

VICdrift has changed the regulations according to cams spec which is the thicker diameter main hoop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...