Jump to content
SAU Community

Recommended Posts

Just curious at this stage, my 33 is all but a write off (they aren't registering it as one but the market value isn't worth repairing it)

I have had the idea of selling out parts to recoup losses.

As such -

RB25DET:

ACL Forged pistons

Shot-peened conrods

ARP studs throughout engine

HKS Step 1 intake and exhaust cams

600CC Siemens injectors

Bigger fuel rail

Rising Rate FPR

Greddy-style manifold

Custom hand-welded piping

Polished cam covers

Brand new coolant hoses

New half-moon seals

New tappet cover gaskets

HKS head gasket

High Flowed Series 2 turbo - capable of up to 20 psi (was making 20psi but kept popping cooler hoses)

Link G4 Plugin ECU, tuned by EFI Performance. Making 212rwkw @ 13psi.

90mm throttle body

Splitfire coilpacks

Custom built Jim Berry clutch

I'm sure I've missed something here, there are a lot of bits and pieces in/on it. Selling as a whole package

Trying to gauge value for it, I'm looking into a new car and need to get as much possible toward a deposit for a newer car. I paid around $4k for the motor but have put another $5-6k into it (parts + labour though!) so I'm thinking $6k nego. You couldn't build this motor for that much!

None of the motor parts have done more than 20,000km. Mainly highway driving.

Photos can be attached. Just doing this as EOI.

Other parts from car available as well!

Will ship Aus-wide, freight can be discussed.

Motor will take up to a gt30 comfortably without any modification.

Also, have a gearbox, short shifted, looking at around $1000 but open to offers. Gearbox has done approx. 160k km

Link to comment
https://www.sau.com.au/forums/topic/413789-rb25det-box-and-tuned-ecu/
Share on other sites

bump up, all parts currently available excluding:

alloy radiator

coilovers

(possibly) gearbox - still taking offers

one or both power window regs with motors

horn plug in area

Also available - genuine Trust intercooler - 600x300x100 with piping to suit forward facing plenum. Piping custom handmade. $400ono.

R33 4 door seats - $100 each plus post

Engine is Series 1 RB25DET - supply with or without Link G4, offers currently in progress on ECU so if you want as a package get in quick!

Front and rear strut brace - $100 the set, post anywhere, suit 2 door possibly 4 door?

Hicas bar - $50

Rear subframe bushings - stiffen the back end up - $50 the set posted anywhere in australia

Diff - standard R33 Series 1 diff - $100

Driveshafts - $100 the set

any other parts ask away! I have most of the interior parts, as well as panels, GTR bootlid with spoiler, locks, dashboard pieces, interior trim!

Text me on 0413475969 with enquiries

Bump up to the top - ECU available, $1300 firm.

Intake plenum, with fuel rail, 600cc injectors and 90mm throttle body - 750 firm, individually cost me 1400 all up with custom made adapter plate from greddy to 90mm throttle with some machining done.

Splitfire coilpacks, suit series 1 rb25det, near new 350 the set

Nearly all interior parts available, RB25DET wiring loom, ignitor, full loom $200, ignitor $50

Fuses needed? Ask away!

Also, I have a rear battery relocation kit available

Feel free to ask, turbo is sold however manifold, piping, genuine TRUST intercooler available

Bump - all I have left for the moment is Trust intercooler, wiring loom, bare motor (no clutch/intake but can supply factory plenum and injectors), catch can, exhaust manifold, 3.5 inch exhaust

BUMP BUMP BUMP

Link G4 Plugin ECU and full car wiring loom available.

0413475969

Loom $500 ono, ECU $1300 firm or as a package negotiate with me



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...