Jump to content
SAU Community

R33 Skyline Won't Start =/

Jms-777

By Jms-777,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Jms-777 Contributor

Jms-777

Posted
Posted

hey guys i need some help here,

never had a starting issue in the year ive owned it, i drove my r33 all day running fine started up fine threw the day drove normal turned it off to filled it up at a Caltex service station (98 fuel always) went paid came back out and the bitch wouldnt start....ended up clutch starting it and it ran fine no issue got home parked it... next day went to drive it and still not starting atm

cranks over fine, tried jump starting it it just cranks even faster, i can hear the fuel pump priming loud and clear, i changed the spark plugs ( BCPR7ES ) the ecu lights up as normal everything...

im losing my mind fml.

Link to comment
https://www.sau.com.au/forums/topic/413871-r33-skyline-wont-start/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

Could be a few things. Could be an injector issue or a spark issue or an afm issue. Start by geting an old spark plug (if you have one kicking around) and unplugging one of the coils, plug in the spare plug, make sure it's earthing in the motor and have someone try and start the car. If you can see the spark plug sparking, then it's most likely not a spark issue.. also listen for the sound of the injectors ticking. You could do this before checking for spark. No injector tick and no spark would both lean towards a dodgy crank sngle sensor.

Jms-777 Contributor

Jms-777

Posted
  • Author
Posted

hey champ so i found the issue, some how i dunno my ecu plug was loose relocated it mounted it now the cars fine Happpys Dayss lol anyways thats sorted after changing my spark plugs my r33 starting to splatter over 5000rpm why? is my gapping wrong or there wrong plugs? i oringanally had Autolite plugs gapped tp .8 but now changed them to NGK BCPR7ES gapped to .8 and it splatters never didit with the autolites?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...