Jump to content
SAU Community

Recommended Posts

i have the following for sale, items are still in car and available to inspect in working order if you wish to see condition. Happy to take off and send etc if you wish but thought it was better to leave on the car as with things like second hand turbo's on the internet you can get burnt.

Condition of all items is good

This would suit someone wanting a reliable massivly responsive 250-270rwkw on E85 or 240 on 98. Is a great package with quality parts and well looked after.

HKS GTRS - $1000

Earls Turbo Oil and Water Lines to suit - $200

ID1000cc Injectors x 4 - $450

Turbosmart Dual Type BOV - 6mths old - $150

Tomei Dump Pipe Suit SR20 - $100

BFR Front Pipe - $100

Z32 AFM with plug - $200

GreddySuper Suction intake kit for S14/S15 to suit Z32 with apexi pod - $220

Apexi Power FC with controller - $1000

location is Kellyville NSW

Willing to post at buyers expence

I am happy to split up however obviously car would not be running if i pulled them off so if you are interested please let me know.

PM me for contact details etc

i didnt get any reply T_T. pls pm or sms me 0468744534.

will pm you again.

cheers.

anthony

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...