Jump to content
SAU Community

Recommended Posts

Anyone have any tips for inspiring a hard drive back into life. Just formatted my computer and one of my other hd's isn't powering up anymore. And typically its the one with my music and pictures on it.

I've swapped IDE cables and power plugs. Can see it in disk manager but fails to load

Cheers

Link to comment
https://www.sau.com.au/forums/topic/415591-dead-hd/
Share on other sites

Tried this morning while it was cold. Still no good. Although in disk manager it show a hd that says unallocated. I can add partitions but I don't understand partitions well and not sure if it would make it worse.

Pulled hd out as it was wedged between a few others. Can't see any physical damage to the board and it sounded like the motor was running. I tried again with it plugged into a different IDE cable. Now the power supply won't power up :(

I have an identical hd. If I can get everything off that then is it just a matter of swapping the circuit boards over and trying again?

Link to comment
https://www.sau.com.au/forums/topic/415591-dead-hd/#findComment-6667523
Share on other sites

If you are just trying to retrieve data I have a thread about it.

In the end this happened:

"DONE!!!!!!!!!! only took a bit over 8 days to scan and then another day or so to copy. Today off to try to explain to the shop including having to say about 4 or 5 times that I dont care about the data on the drive anymore just gimme money or another drive and understanding about 2% of the Japanese that was being said to me. Dont know whats been corrupted but so far a lot seems to have been recovered. Mini power tool data recovery 6.5 did the job although I reckon Disk Internals would have done the same job in about 2 days."

Here is the thread:

http://www.skylinesaustralia.com/forums/topic/353567-windows-cant-detect-a-hdd-any-hope-of-recovering-data/page__hl__hdd%20recovery

Link to comment
https://www.sau.com.au/forums/topic/415591-dead-hd/#findComment-6668268
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
×
×
  • Create New...