Jump to content
SAU Community

1Jz Supra

25GTV

By 25GTV,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

25GTV Experienced

25GTV

Posted
Posted

THIS IS NOT MY CAR I HAVE ADVERTISED IT FOR A CLOSE FRIEND. PLEASE DO NOT PM ME - CALL THE NUMBER!!!

Hi Guys,

Im selling my 1986 MkIII Supra. It has been built as a Drift/Track car and is a reliable and quick car.

It started life as aTarga Top ADM MA70 but has since had a JZA70 front cut transplanted into it. The car currently has NSW rego until the end of the year and is also engineered for the conversion.

It has:

-1JZ-GTE 2.5L Twin Turbo

-W58 Gearbox

-New Clutch

-Mines ecu

-Half Cage

-Locked Diff

-Bilstein Suspension

-Kmac Sway Bars

-S13 Radiator

-17x8 Wheels with new 235/45 Tires

-JZA70 Brakes

-Extra Lock Spacers in Steering Rack

-Genuine TOM'S Racing Body Kit

It is a great car to either keep as a streeter or keep as a track car. The body is clean and tidy with only a few marks here and there but still a very clean street car. I'll get photos up tomorrow but for now just a clip of it at Wakefield doing a top of 4th entry down the straight.

$4800ono

Loacted in Sydney.

0409 411 735

Cheers

img6152nv.jpg

img6151c.jpg

img6150rl.jpg

img6148p.jpg

img6147xc.jpg

img6144s.jpg

img6145l.jpg

Link to comment
https://www.sau.com.au/forums/topic/416042-1jz-supra/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...