Jump to content
SAU Community

Recommended Posts

I have an intercooler kit that was purchased off these forums for sale. It was made by Micks Metalcraft in Villawood, NSW.

CORE dimensions are 600 x 300 x 70mm

Kit includes :

600x300x70 core with polished end tanks

Pipework : (2 1/4 inch - same as std piping size for minimal pressure drop)

pipe that goes into core (start from inner wheel arch),

out pipe from core goes to drivers side wheel arch (a hole must be cut)

the cross over pipe (goes from drivers side wheel arch, up over radiator fan to plug into std pipe that crosses over rocker covers). Mandrel bends.

Silicon Hoses (blue) x 4

Stainless steel hose clamps (x8)

This is a complete kit ready to go in. All u need to do is cut the hole in the drivers wheel arch (easy and not illegal) and make some support brackets for the core to hang off.

Reason for sale : I need a bigger kit for 350rwkw for the RB31DET.

PRICE : $1100 or $1200 delivered to your door!!!

Attached is pics of the core, later i will add pics of the pipework and clamps etc...

:(

edit / WILL SEND ANYWHERE IN AUSTRALIA!!!

Link to comment
https://www.sau.com.au/forums/topic/41623-r32-intercooler-kit-brand-new-1100/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...