Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

GTR's have a front facing plenum dont they?? Its made for a GTSt but the only part needed to be changed would be the top return pipe. The in pipe comes from the passenger wheel arch (std positiion) then the out pipe goes to the drivers wheel arch. All u would need is to have a pipe made to go from the weel arch to your throttle body...

**** this is a good price ppl!

FMIC's on all RB20 and RB25's decrease lag!

Colder intake air= quicker combustion= more power earlier = Quicker spool

A mate picked at 20 rwkw with his custom FMIC and my younger brother got 22 with a similar kit

Guys I bought this kit for $1100 (which is Damn cheap as it is) Why would i turn around and sell it at a loss to myself. Unique Autosports sell a similar kit for $1695, so why PM me with offers less than $1000???

$1100 - NO OFFERS INCLUDES COURIER FEES TO ANYWHERE IN AUSTRALIA !!

If u can do better than buy it.....

Its still available ;)

Its actually a pretty good designed core. Its a hybrid between bar and plate and tube and fin, so you get the best of both designs. Bar and plate cool better, and tube and fin have less pressure drop so this would go awesome on any r32....I think they said intake temps went from 65 degrees to something like 23 with this kit.

This is more than enough for any r32 (unless u want to punch out big hp numbers like me ;))

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...