Jump to content
SAU Community

Why Am I Getting A "crunch" Noise When Shifting 2Nd To 3Rd?


Recommended Posts

I've got my 2009 from new, as daily driver & doing 2-3 track days a year.

Has done 53,000kms now, with Custom Willall Cobb tune by Martin, LC5, HKS mid pipe and Willall Lite Trans fluid. Has been a beautiful car to drive.

Clutch relearned. CC= +1, TP= -1.

Started noticing a "groan" noise ("oarkk") about 1 month after I changed to the Willall Fluid (2months ago). Only happens between 2nd and 3rd gear. Intermittent usually, when car is cold.

But, today it happened when fully hot in a roundabout going "clockwise", whilst accelerating moderately hard.

It sounded like gears clashing ("crunch") when changing gears inaccurately in a manual stick shift. Tried to reproduce it but couldn't. This is the 2nd time it has happened when lateral G force is associated. ?coincidence?

Anyone experience this? My feeling is that the "groan" noise has progressed to the "crunch" noise.

Car still drives normally, and out of warranty.

Is this serious? Thank you all in advance.

Sounds like diff bind to me. If it only happens when turning. I'd say its quite possibly normal.

You should hear the noises my rear diff makes reversing up my driveway every time... Lots of crunching, followed by bunny hops etc, etc.

Check out NAGTROC as well. For sure someone has had the same issue there

Edited by Wardski

Thanks guys.

Its good to know that it doesn't sound serious. Although, being so loud, it doesn't give me a good feeling, mechanically.

Why only 2nd to 3rd and not other gears? If it's diff related, shouldn't it be any gear?

Hi Martin:

How can I tell if it's some problem with the gear stops, circlips, fasteners or piston clips/seals?

What symptoms should I look for?

By the way, your Cobb tune is bloody awesome: I was doing a drag (no launch, just plant foot) yesterday with a friend's stock MY2012, and my 2009 fully kept up with it to about 120kmh then started to slowly creep further beyond that. I wonder if it would beat it by much more if we had kept pushing towards 200kmh!

Good work, mate!

Hi Martin:

How can I tell if it's some problem with the gear stops, circlips, fasteners or piston clips/seals?

What symptoms should I look for?

Drop the transmission oil pan and look for metal fragments. If anything nasty was going wrong in the trans you'll find debris, plus the GTR trans is pretty sensitive to throwing CEL codes when things start to go wrong.

I still think diff bind to be honest. Why it happens going from 2nd to 3rd, who knows. There could be other factors at play, not necessarily related to the gear change from 2nd to 3rd, and turning right.

IMO I would start thinking about getting Martin's 2009/2010 refresh kit done. Once my '10 is out of warranty, its the first thing I'll be doing.

I'm in no way an expert in all of this, Martin is surely the man to ask/confirm. However I've read enough horror storys on NAGTROC to have a fair idea.

Also on the positive side, the fact that you've done 50 something thousand kms in yours without issues is simply amazing and gives me hope!!!!! :D

Edited by Wardski

Hi Martin, am I using your 2009 Renew Tune, currently?

Also, the "noise" doesn't come all the time. Hard to record, but I'll try.

It lasts for about half a second, just before 3rd gear engages.

And sounds like - "k r k r k r k r k r k r k r k r k shhaarrk " !!!

Hey Wardski,

the car has been pretty good. Don't wanna drop the oil pan yet as i've just put in the expensive trans oil 3 months ago.

Thanks for your thoughts. I hope you are right about the diff bind.

Wishing you all a HAPPY NEW YEAR, guys...

.....and ever increasing reliable power and torque!!!!! :yes:

  • 5 months later...

Hi Guys,

The "Krkrkrkrk" sound is still happening occasionally. I've taken it the track since then. Also had Martin's new tune.

Still happening sporadically and very irritating.

I've been able to reproduce the "krkrkrk" when shifting from 2nd to 3rd gear by doing this procedure:

1) Drive the car in (manual) 2nd gear at 3500rpm for 3 seconds without accelerating. Stable throttle.

2) Then manually change to 3rd gear, with throttle still stable.

3) I hear a "krkrkrkrkrkrkkk" before 3rd gear engages. It also feels that gearchange takes longer and more jerky to engage.

I am wondering if it really is diff bind or something more sinister.

Any help appreciated.

Thanks!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...