Jump to content
SAU Community

Newb In Adelaide

Ricky_Bobby

By Ricky_Bobby,
in Introduce yourself

 Share

Recommended Posts

Ricky_Bobby Enthusiast

Ricky_Bobby

Posted
Posted

Hey Guys,

My name is Bobby , I am new to SAU forums but no stranger to owning Jap imports etc.

I used to have an R32 (in my avatar) , since then had an S15 and now just drive my ute.

I work with Dohmar and grabbed a non complied 33 late last year, planning on doing some hill climbs, motorkhanas, track days etc.

The paintwork on the car is a bit rough and it was an automatic when I got it, its now manual with short shifter and puck clutch.

Got Marky Marc at ET's to do some exhaust work for us with a screamer and flutes out the back , slowly but surely adding small bolt on's until I can spend more time and money later in the year once I finish working on the house.

I started a blog to generate a bit of interest from friends, family and anybody that wants to donate goodies marketing.

Check out the link if you get bored, I doubt I will get to any interstate events but for the Adelaide guys I look forward to seeing some of you other guys out there in 2013 ! :action-smiley-069:

Cheers

Link to comment
https://www.sau.com.au/forums/topic/417261-newb-in-adelaide/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...