Jump to content
SAU Community

Bf Fpv F6 Typhoon With 300+Rwkw

stawka

By stawka,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

stawka Proficient

stawka

Posted
Posted

Time to sell my beloved FPV F6 Typhoon in Mercury Silver. The mrs wants to buy a block of land together so the money I get for this will help towards my end of the bargain. It's in pretty damn good condition and well looked, the car has been clear from accident's and has no encumbrance owing on it. Comes in the ZF 6-speed auto which is driving very well, no leaks or anything like that from anywhere on the car. It really is extremely clean and now comes with a full year registration

I have just fitted up a brand new set of 20" Silver Agent STAGGERED wheels and tyres, with a whopping pair of 275's on the rear for premium grip and safety. An original XR8 bonnet has also been fitted to it, so there is not much left to do aesthetically. The front and rear brakes were recently replaced costing over $1,800 so you're basically getting brand new Brembo's to go with it.

Other than the wheels and XR8 bonnet, the car has just had $3,000 spent on mild performance goodies. Just had a set of 90lb injectors fitted, a high-flow catalytic converter for better breathing, a Plazmaman intercooler, Bluepower CAI and a custom tune, pumping out 302KW at the wheels a mild 13psi. Comes will full service history and the most recent service done at Bluepower was a performance service, achieving great results.

The car really has no faults at all so it will pass any inspection and roadworthy by anybody's standards. Happy to provide roadworthy and undergo any sort of test. No time wasters and low-ballers please. The car is extremely clean inside and out, is at an awesome price of $21,990, I have a little room to negotiate as I do need it gone, but no swaps please. A genuine sale

Can assist with transporting to interstate buyers

Contact Manny on 0488582587

post-16806-0-77571700-1358727129_thumb.jpg

post-16806-0-87859900-1358727141_thumb.jpg

post-16806-0-90830600-1358727154_thumb.jpg

post-16806-0-07615900-1358727170_thumb.jpg

post-16806-0-99766700-1358727185_thumb.jpg

post-16806-0-38370600-1358727200_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/418213-bf-fpv-f6-typhoon-with-300rwkw/
Share on other sites
stawka Proficient

stawka

Posted
  • Author
Posted

$21,000 FIRM, no swaps either please

Anyone that knows these kinds of cars, knows that 302rwkw with these mods is impressive, and a great point to start throwing more supporting mods to. The wheels are staggered and has 275's on the rear so the grip is there, the genuine boss bonnet is already done, the brakes have recently been replaced

The car is basically done, for someone to drive as a daily and have a 300rwkw beast. Come take it away

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...