Jump to content
SAU Community

Recommended Posts

Hi Guys,

Need to pay some debts so parts will need to go :(

Up first is my spare turbo which i was pretty keen to try out with my combo as the results would be epic BUT unfortunately it needs to go....

Genuine Garrett GT3082 turbo with .82 Ext Gate rear housing, extrude honed housings and no shaft play, this turbo is in great condition.

This turbo is in very good condition and will be awesome on any Rb25/26 combo, chasing $795.00 for it (Currently in a Garrett turbo box with packaging etc)

Pic -

post-47580-0-14654200-1358997584_thumb.jpg -

Next is tyres -

2 x 235/40/18 Kuhmo KU36 Street Semi tyres, Still legal tread, look like new but are slightly feathered from poor wheel align, sell for $220 for the pair

2 x 275/35/18 Nexen N3000 tyres, Tread like new, not the grippiest things i have driven on but a hell of a lot of life left, sell for $200 for the pair

2 x 275/45/18 Falken jap tyres, should be grippy but were too big for my car, awesome tread (Worn slightly in centre from overinflation) sell for $150 for the pair

OR Take all 6 tyres for $500 (Photos can be taken but they are black and round, serious buyers will get pics)

And a diff -

R34GTT R200 DIFF centre and shafts, this diff is shimmed up and basically locked, it was running in my 34 but had an oil leak... Needs the right shaft seal replaced and should be good to go, I replaced it with a Nismo mechanical so i have no need for this, Sell for $200 (Cheap due to needing a seal and oil etc)...

And a Boost controller -

HKS EVC 5 Boost controller, this unit was in my car and would go fine for ages and then have an Err100, If you google it there is a few solutions but i do not have the time nor do i have the patience for this thing, i paid $550 brand new and it was in the car for less that 6 months, Sell for $300 (Who knows you could fix it easy and have a brand new HKS controller dirt cheap)

MSCN Billet fuel filter, never replace your filters again, wash it and go again, this is the -6 black version found here http://www.mscn.com.au/scripts/prodView.asp?idproduct=362 and it did around 2000kms on my car, once again as new, sell for $100 (Retail is $155 i think)

There are so many spare bits in my shed from the car etc that i will need to sell, i have a lot of stock parts too that ill try list when i sort it all out, basically anything i am not using will be sold.

Msg me on 0434353292 or send a PM if interested, low balls will be ignored, this is a good turbo for the money! Located near Newcastle.

PM is normally the best way to get me as i then know who you are, random numbers make it hard to keep a track of names...

Thanks

Mat

PM's and Txt replied.... If you want pics ill send them via MMS no problem :)

Hey mate I'm new to this. Is this turbo bolt in for a RB25 NEO?

Will require supporting mods and a few things to bolt it up... If you want a direct fit you need to go something like a HG or Kando kit etc.....

Also, i should clarify it is a single scroll T3 rear housing, i have had a few txts asking..... Sorry if i wasnt clear!

If i can find it i will chuck in a free K&N pod filter with the turbo if it sells soon :D

  • 2 weeks later...

$750 cash for turbo - pick up!! Can meet Newcastle/Hunter or Central Coast areas if needed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...