Jump to content
SAU Community

Recommended Posts

hi im just after a r32 rb20det engine wiring harness and ecu.

Ill also need air flow meter aswell and im sure a few other sensors but wont know exactly until i change the wiring over in my hr31 passage as the previous owner did a silvertop conversion but left the redtop ecu and wiring...

Either just pm me or send me a txt in 0424108110

Located nsw 2259

Thanks

Joel

Link to comment
https://www.sau.com.au/forums/topic/418982-wtd-r32-rb20det-loom-and-ecu/
Share on other sites

Hey mate i can help with all the sensors and possibly the loom and ecu, im pretty sure you will need afm, Cas, tps, maybe o2 sensor.. Also a igniter and different coilpacks/ coilpack loom (or custom wiring or an adaptor to suit your current coilpacks/loom and igniter...

Cheers

Corin

If u can let me know how much that would be good. I honostly have no odea what has been changed and wat hasnt all i know its got some dodgy ass steal housed afm tht maxes out over 8psi if i hold it on boost for more the n 15seconds and im assuming its the standard redtop ecu as its huge with about 5 plugs going into it instead of the 1 the r32 ecu has. I have r32 yellow jacket coil packs in it atm so the coilpack loom must of been changed or chopped lol.

I pretty much just want to change everything anyway since i dont know whats what and if something breaks i have no way of finding what to buy so though better off re doing it all properly.

Im re spraying the car atm and want to have it back on the road in the next 2-3 weeks so id be keen on getting the parts i need asap so i can sort it out before then.

Thanks

Joel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...