Jump to content
SAU Community

Motive Airport Thrash - May 11Th - Open To All

JET200

By JET200,
in Motorsport Discussion & Builds

 Share

Recommended Posts

JET200 Proficient

JET200

Posted
Posted

With the popularity of our Drag Battle and GT-R Challenge at Cootamundra Airport, still the best airport to race one, we have decided to hold a open Motive Airport Thrash. It's open to any modified car that is registered and on street tyres with a full exhaust with any driver who has a driver's license.

Its a great place to enjoy your car safely, and our new 250m long "Thrash Pad' is great place to warm up your brakes, drivetrain and tyres or, have a little bit of fun on 5000 square metres of bitumen :)

Event is May 11th from 9am-5pm

Cost is $130 per car with 1 pit crew before March 31st and $150 after March 31st. Can have up to 4 extra pit crew for $20 each.

More info on our website here: http://motivedvd.com/motive/motive-airport-thrash/

And entry form can be downloaded here: http://motivedvd.com/motive/wp-content/uploads/2013/02/2013_Motive_Airport_Thrash_Entry_Form.pdf

post-60913-0-24821200-1360277406_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...