Jump to content
SAU Community

Recommended Posts

For Sale: 2005 Nissan YGZ11 CUBE3 1.5L 7 Seater

Price and price conditions: $16,950 neg. I will consider trades for cheap automatic car + cash my way as I already have another car arriving in April. I will also consider reasonable offers and to sell without registration and number plates to interstate buyers at a reduced price.

Condition: Excellent

Contact Details: Juliette - PM / Mobile: 0431 379 828 / Email: [email protected]

Location: Bayswater North, VIC, 3153.

Delivery & Conditions of Delivery: Flexible. Happy to help interstate buyers organise transport.

For sale I have a 2005 YGZ11 Nissan Cube3 15M. I imported the car in 2010 after meticulously searching Japan for many months for the best example. Super tidy exterior, very clean interior, very low genuine 74,000km's and mechanically flawless. This car will give you many hassle free years of motoring. Happy to show prospective buyers all receipts.

The late model 1.5L CVT 7 seater is the pick of the bunch with ample seating room. Fold the seats flat and you have a van that can carry nearly anything your heart desires. Lift up the seats and look under the floor to reveal secret storage spaces. The bigger engine in combination with the CVT transmission mean that it is quite zippy, but uses very little fuel. Do not even consider the 1.4L Auto as this runs rings around it. Quicker and more economical to boot. Always run on 98 octane fuel and serviced before the scheduled interval (last service done 500km's ago.)

The genuine Nissan Neoclassical bodykit and wheels were added by me in Australia at considerable expense, but they really complete the look of the car. CUBE3 number plates will be included with the sale so there will be no mistaking what your little car is. Car also includes genuine floor mats and slimline window visors.

I will be sad to see this car go, but I know that the new owner will love it just as much as I have. Test drives after hours/on weekends welcomed.

16577906.jpg

IMGP0940.jpg

20786253.jpg

Japan-SatNav.jpg

Japan-Boot.jpg

IMG_0563.jpg

Japan-BackSeat.jpg

Japan-MiddleSeat.jpg

Japan-FrontPassenger.jpg

Japan-FrontDriversSide.jpg

Edited by llama_au
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

what sort of cheap auto might you be after?

ive got a

2003 Holden Astra TS CDX MY03 70000km

Sorry, I have another car now so I'm not looking for a trade. Would you still be interested in my car? Happy to negotiate.

I'm looking at importing a cubic at the moment but only have a budget of 12k. If you ever drop that low PM me

PM'ed anyway :)

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...