Jump to content
SAU Community

Recommended Posts

'A tune' is not a fixed thing... so it's hard to shop a price for 'a tune'.

Nick at GT is good at what he dose and depending on how much time he spends doing what with your car will depend on what he charges you... it's not very common that a car will roll into his workshop with zero issues/problems etc and only needs 'a tune'.

Just go have a chatt with him, do as much of the preperation work your self as you can and book it in.

Cheers

Justin

Mainly I just need an idle and boost spiking fix as the person who tuned my car struggled with those 2 things as he usually only does power fc's. I didn't have the problems before the tune so I am guessing it's in the tune. Thank you Justin :)

They're usually the two most time consuming things to get right... Idle issues could be almost anything and as for boost, I'd just install a turbotech boost T and solve all your issues all at once.



What else did you change before the haltech install and initial tune? I'd be looking at pressure testing your intake and looking for leakes/split hoses and or missing vac lines.... clean your iac motor etc and making sure your intake is all sealed up properly.



What's the idel doing?




Cheers



Justin


The initial tune didn't have those problems, this is the second haltech tune but by a different guy.

The idle is just dying (mainly if you put the clutch in at 3k+ revs) and will stall at times or come very close.

The changes from initial haltech tune to this one:

850cc injectors

garrett 3076r turbo (with custom stainless intake)

bosch 040 pump

nismo fuel pressure regulator

I had heard boost T's were prone to boost spiking, is this just a myth?

Beau, in honesty you have changed alot between tunes.. you will probably find that your idle issues are as much mechanical in nature as anything else. Do you still have your stock bov? is it plumbed in as standard? are you getting reverb back through the new intake causing map sensor spikes, is your tps set correctly?

Nick can fix it for you, just don't expect a tune will be the solution... sounds like the tune needs a good looking over though.

A turbo tech boost T is as reliable as you can get.... just don't buy any other type/brand of T. Again, Nich has them on the shelf.

Cheers

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...