Jump to content
SAU Community

Recommended Posts

Personally for me I like concave over deep dish. It really depends on your wallet, if your budget is >$3-4k then definitely concave, otherwise deep dish. You can get both if you're willing to spend $6k or more. I really wish I could have a set of DPE Super Concave wheels like these. *drools*

6024357225_3799dd99a6_o.jpg

Nissan%20G35%20Fitted%20With%2020%20Inch

FAP FAP FAP! They look so sick, i would give up dish wheels for those but i bet they'd put you out of pocket something crazy like $7,000+

  • 2 months later...

Would you guys be interested in a group buy for a 3 piece forged set of rims in any size/offset/color you want at almost half the price of what the others are asking ?

All brand new with warranty, certificates of quality (all the international standards and materials used as well as safety and structure testing). Basically come from the same place as a lot of the big price tag items.

For the group buy, ideally they would want at least 10 sets to get the best discount!

Really big on concave these guys ;) PM me for more info and to register interest in a g/b before I start a proper topic in the appropriate forum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...