Jump to content
SAU Community

Recommended Posts

Okay so in the next week i'm going to be purchasing a new set of BC BR coilovers, and to go with that i'm going to need a front camber kit.

I would really like a set of SPC camber arms, i have always liked their product and they are reasonably affordable. Only problem is i can't seem to find anyone in Oz that supplies them, and a new set from the states is $500.

I am dealing with Mick @ Boostn Imports down in Brisbane for my coilovers, he has suggested a brand called "Hard race" i have never heard of them before, and for $349 a set i'm not sure on how good the build quality is.

Here is a link to their website http://www.hardrace.com/ i am curious to know has anyone run any of these products on their cars? I know they are popular amongst the Honda scene just wanted to know how they go on our cars if not similar. Mick says they are usually a popular seller with his business and they are a good product i'm just after some user feedback or if anyone could point me in the direction of a product similar to SPC that won't cost me an arm and a leg.

Cheers

Edited by Seano350GT
Link to comment
https://www.sau.com.au/forums/topic/420801-front-camber-kit/
Share on other sites

Hardrace from what ive seen are generic China stuff

Little more but you can get SPL through JDM obsession, from what ive seen in there arms for S chassis and what ive read for the 35 arms seems to best quality with out being redardedly expensive. Everything I have got off him is actually cheaper than the US price + postage

I did originally think of SPL but i have always seen them as being more expensive as SPC parts. I'll check out JDM obsession and see what they can do for me, are they here in Oz?

edit: Locky i'm on their site and can't see anything about them stocking SPL parts for the V35 only s chassis cars

Edited by Seano350GT

yeah they are in NSW

Not on his site but I did get a quote on some rear stuff for the 35, Not a huge demand for them in aus yet espeically compared to S chassis but have seen a price list for Z33/V35 posted somewhere. I have spent an easy 3-4K through him for S chassis stuff , him and streeter are the 2 people I can not rate highly enough

ok great thanks for that mate, i posted on JDM obsessions facebook but i will email them now and see what's going around. I might even bite the bullet and pay the extra for the SPC front kit. At the end of the day, it is suspension and plays a pretty bit role in the cars safety so i'll nut it out over the next week and see what i want to do.

The 'hard race' units look very much the same as the ichiba camber arms.. a quick google of these will turn you off fairly quickly.

If you don't want to go with the SPC PRO arms, you can get their standard arms. - this is a US page, so you will need to add freight.

http://www.z1motorsports.com/350_g35/product_info.php?products_id=4635

i will also be getting a front camber kit for my cpv35.. definitely i'd go with the best quality item you can get, these are not parts you want braking under fatigue! i was looking at the cusco A-arms..the SPL Pro stuff from the US seems to be top quality too..are the SPC A-arms adjustable by spacer or screw-type?

MoonFaceRacing (MFR) make the SuperLap A-arm for V35 but it doesnt look like an adjustable one? anyone have info on this?

Anyone else used cusco adjustable camber kit on their V35? if so opinions?

SPL is meant to be the bees knees, more common on track/drift cars. Daily drive the SPC's are meant to be great, i've found another vendor in the states that can get me a better price on the SPC front camber arm, he thinks he can beat $450 delivered so i'll get an email soon confirming that. If anyone wants the SPC camber kits front or back hit up - [email protected] he works directly with SPC in the states and ships world wide.

Thanks for the tip Sean.. I am going to see how my front tyres fare with the -1.4deg camber with the stock arms.. have done nearly 2,000km (city) on them so far and can't detect any additional wear on the inside edge of the tyre.. I guess I will probably need about 10,000km before I can come to any conclusions.

no worries, if you guys are on facebook you should really join the V35 coupe drivers group. Heaps of good info to be found there, those guys in the states are mad about the stance scene and that so they know suspension fairly well and it's good because alot of the vendors from the US are on there posting up their specials and chiming in on posts about parts and shit so yeah helpful bunch of people.

Edited by Seano350GT

1.4 deg camber is nothing

It's toe that kills tyres

I was more worried about uneven wear with too much camber.. some say I will chew out the inside of the tyre fairly quickly, some say that 1.4deg is nothing to worry about and it shouldn't impact much on tyre life.. I will just wait and see for myself.

It makes sense that too much negative camber will wear out the inside edge of the tyre quicker than normal..

Paid $570 delivered for Cusco arms from JDM Concept.

$146 delivered for a full Energy Suspension bush kit for the front from Ultrarev on Amazon. 310318151890_3.jpg

$200 delivered for rear arms from SPC, also on Amazon.

Our sedan is running 350Z springs and used to chew tyres at an alarming rate, now they look as good as the day they went on.

Edited by gtrtech

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...