Jump to content
SAU Community

Recommended Posts

Okay so in the next week i'm going to be purchasing a new set of BC BR coilovers, and to go with that i'm going to need a front camber kit.

I would really like a set of SPC camber arms, i have always liked their product and they are reasonably affordable. Only problem is i can't seem to find anyone in Oz that supplies them, and a new set from the states is $500.

I am dealing with Mick @ Boostn Imports down in Brisbane for my coilovers, he has suggested a brand called "Hard race" i have never heard of them before, and for $349 a set i'm not sure on how good the build quality is.

Here is a link to their website http://www.hardrace.com/ i am curious to know has anyone run any of these products on their cars? I know they are popular amongst the Honda scene just wanted to know how they go on our cars if not similar. Mick says they are usually a popular seller with his business and they are a good product i'm just after some user feedback or if anyone could point me in the direction of a product similar to SPC that won't cost me an arm and a leg.

Cheers

Edited by Seano350GT
Link to comment
https://www.sau.com.au/forums/topic/420801-front-camber-kit/
Share on other sites

Hardrace from what ive seen are generic China stuff

Little more but you can get SPL through JDM obsession, from what ive seen in there arms for S chassis and what ive read for the 35 arms seems to best quality with out being redardedly expensive. Everything I have got off him is actually cheaper than the US price + postage

I did originally think of SPL but i have always seen them as being more expensive as SPC parts. I'll check out JDM obsession and see what they can do for me, are they here in Oz?

edit: Locky i'm on their site and can't see anything about them stocking SPL parts for the V35 only s chassis cars

Edited by Seano350GT

yeah they are in NSW

Not on his site but I did get a quote on some rear stuff for the 35, Not a huge demand for them in aus yet espeically compared to S chassis but have seen a price list for Z33/V35 posted somewhere. I have spent an easy 3-4K through him for S chassis stuff , him and streeter are the 2 people I can not rate highly enough

ok great thanks for that mate, i posted on JDM obsessions facebook but i will email them now and see what's going around. I might even bite the bullet and pay the extra for the SPC front kit. At the end of the day, it is suspension and plays a pretty bit role in the cars safety so i'll nut it out over the next week and see what i want to do.

The 'hard race' units look very much the same as the ichiba camber arms.. a quick google of these will turn you off fairly quickly.

If you don't want to go with the SPC PRO arms, you can get their standard arms. - this is a US page, so you will need to add freight.

http://www.z1motorsports.com/350_g35/product_info.php?products_id=4635

i will also be getting a front camber kit for my cpv35.. definitely i'd go with the best quality item you can get, these are not parts you want braking under fatigue! i was looking at the cusco A-arms..the SPL Pro stuff from the US seems to be top quality too..are the SPC A-arms adjustable by spacer or screw-type?

MoonFaceRacing (MFR) make the SuperLap A-arm for V35 but it doesnt look like an adjustable one? anyone have info on this?

Anyone else used cusco adjustable camber kit on their V35? if so opinions?

SPL is meant to be the bees knees, more common on track/drift cars. Daily drive the SPC's are meant to be great, i've found another vendor in the states that can get me a better price on the SPC front camber arm, he thinks he can beat $450 delivered so i'll get an email soon confirming that. If anyone wants the SPC camber kits front or back hit up - [email protected] he works directly with SPC in the states and ships world wide.

Thanks for the tip Sean.. I am going to see how my front tyres fare with the -1.4deg camber with the stock arms.. have done nearly 2,000km (city) on them so far and can't detect any additional wear on the inside edge of the tyre.. I guess I will probably need about 10,000km before I can come to any conclusions.

no worries, if you guys are on facebook you should really join the V35 coupe drivers group. Heaps of good info to be found there, those guys in the states are mad about the stance scene and that so they know suspension fairly well and it's good because alot of the vendors from the US are on there posting up their specials and chiming in on posts about parts and shit so yeah helpful bunch of people.

Edited by Seano350GT

1.4 deg camber is nothing

It's toe that kills tyres

I was more worried about uneven wear with too much camber.. some say I will chew out the inside of the tyre fairly quickly, some say that 1.4deg is nothing to worry about and it shouldn't impact much on tyre life.. I will just wait and see for myself.

It makes sense that too much negative camber will wear out the inside edge of the tyre quicker than normal..

Paid $570 delivered for Cusco arms from JDM Concept.

$146 delivered for a full Energy Suspension bush kit for the front from Ultrarev on Amazon. 310318151890_3.jpg

$200 delivered for rear arms from SPC, also on Amazon.

Our sedan is running 350Z springs and used to chew tyres at an alarming rate, now they look as good as the day they went on.

Edited by gtrtech

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...