Jump to content
SAU Community

Recommended Posts

Hey guys,

Just a couple of quick questions - Im heading down to Daikokufuto this weekend

Is it better to go Friday or Saturday?

What times?

Roughly how much will the taxi from the train station cost from the train station?

I plan on bring a heap of warm clothes and a take away meal, I have no doubt there will be vinding machines for warm drinks there too. Im planning on staying a while but roughly what times?

Any help would be much appreciated.

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/421147-daikokufuto/
Share on other sites

Rent a car it will be cheaper. No need to take food as there's anything from Indian curry to Macca's available. Cops shut it down pretty early these days so I'd get there reasonably earlyish around 7pm, have some food and kick back. You can't really tell which night will be better and weather can dictate how many people show up. Keep in mind the days of lots mental cars turning up are long gone. Seriously your better off grabbing a rental car for a couple of days and check both nights and have the fun of cruising around Tokyo. Check the link below , all in english but your probably out of time to book for tomorrow. http://www2.tocoo.jp/?file=rentcar_inbound/main&asp_id=0001

You can also grab a car from these guys in Otori which has subway station across the road and is easy as to get to plus heaps of cheap hotels around the area with parking. You can get english navigation and Daikoku is about 15mins down the expressway. http://nissan-rentacar.com/english/shop/tokyo/shop127.html

Link to comment
https://www.sau.com.au/forums/topic/421147-daikokufuto/#findComment-6775269
Share on other sites

Thanks guys for your input! It's much appreciated!

I took your advice and hired a car.. Daikokufuto is a far way from Asakusa. But we used the car to go to Mt. Fuji and planned to go to the Fish markets the next morning.

.. but ..

About 5 min Daikokufuto, at a red light a van crashed into our car at considerable speed. Luckily my girlfriend who was the third person and in the back seat was ok. It was a Nissan March (now I'm very glad there was no Kei Cars available - which we were very upset about at the time).

All this happened about 5 min down the road near Yokohama.

To rub salt in the wounds we saw a fair few cars heading past us too.. and a few Bosozoku boys making fun of the police (which are even more polite, helpful and friendly than the rest of Japan) .. which brightened up our night a little.

We will see what will happen with the insurance tomorrow morning at Nissan Rental place.. but needless to say.. after not making it there tonight.. I will be there for at least next Saturday.

Link to comment
https://www.sau.com.au/forums/topic/421147-daikokufuto/#findComment-6778092
Share on other sites

You should be fine with the insurance .

If its through proper Nissan rental and the car is drivable your looking at worst 20,000yen. A write off would cost 50,000yen.

Even the cheap rental companies in Japan have the same insurance deal so i would not be too stressed.

Hope you and the police got the other driver details , especially if he was in the wrong as you can sue his arse off and he will have to pay your excess and anything else you want from him in cash !!

Link to comment
https://www.sau.com.au/forums/topic/421147-daikokufuto/#findComment-6779042
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...