Jump to content
SAU Community

Recommended Posts

Race car build is aborted so selling heaps of aftermarket race gear.

M800 like new complete with loom can cable, manual. sell $3500 paid $4500

DSC_3045_044_DSC_3045_zps4985e0d2.jpg

AIM digital dash as new unmarked sell $1100 Paid $2100

DSC_3013_012_DSC_3013_zps5cd2c993.jpg

AEM CDi unit 8 channel all cables and manual New unused and unboxed sell $340 Paid $550

DSC_3003_002_DSC_3003_zps94a82f7a.jpg

Proflex MCA suspension for Z32, R32

New unused, has been bolted on the car on the hoist for the last 3 years. Adjustable compression and rebound $4500

Top quality race coilovers custom made. They dont get much better, Where $7000 when purchased.

Seen your ad in 105.com, good luck with the sale, MCA is the top shelf stuff, unfortunately my built is GTR33, got a set of track spec Beilstein, non adjustable for rebound and damping. can't wait to sort them out when car is ready in a couple of weeks, Z32 won;t fit my car.

good luck

cheers

Thanks matey, I havent got an ad on MY105 though. I am pretty sure these coilovers will fit on an R32. But I am no expert on R32's :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...