Jump to content
SAU Community

Recommended Posts

Engine needs work!

The timing belt came off and suspect that the valves are bent. The crank DOES NOT turn over, and will be sold as is - no rego and no roadworthy. Perfect for someone who has the time to fix it!


I am the second owner in Australia - beautiful car to drive, turned many heads. Was pulling 200rwkw with the below basic mods - great base for a powerful car.


The car comes with:

- Factory Nismo bodykit.

- Factory Nismo (Bilstein) suspension (off-car height adjustable - legally compliant).

- Factory Xenon HID headlamps with Philips 6000K bulbs.

- Australian standard alarm and immobilizer fitted with key less entry.

- Interior is in immaculate condition, no rips or tears.

- All electrics in perfect order.

- Blitz return flow front mount intercooler (no holes cut - legally complaint).

- Apexi AVCR electronic boost controller.

- Walbro 500hp GSS342 fuel pump (wired to direct voltage).

- Nistune ECU (tuned by Chequered tuning).

- 3" turbo back exhaust.

- Splitfire coil packs.

- Apexi Power Intake pod air filter (not pictured - standard air box with Blitz high flow panel filter can be included).

- Sony MP3 player with Pioneer speakers all around.

- 18" Koya Driftek wheels & tyres (standard 17" alloys included).


Selling due to changed commitments. My loss is your gain.


VIN: 6U90000ER34028677


Price: $11,000

Location: Doncaster East, Victoria.

Contact #: 0401 371 770


Ali.

post-94782-0-77729000-1365376769_thumb.jpg

post-94782-0-35128000-1365376770_thumb.jpg

post-94782-0-85273500-1365376770_thumb.jpg

post-94782-0-30892200-1365376771_thumb.jpg

post-94782-0-95465100-1365376771_thumb.jpg

post-94782-0-53105700-1365376772_thumb.jpg

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...