Jump to content
SAU Community

Recommended Posts

Hey there! Selling some items as I am upgrading. All items in good working order, located in Campbelltown, Sydney.

Apexi Power FC with hand controller - came out of my series 2 gtst - $950ono

Apexi AVC-R - comes with everything - $300 ono

Nismo 740cc injectors - $600ono

Z32 afm with plug - has both mesh screens pulled out - $200ono

Walbro in-tank fuel pump - $75

Think that's it. Will do a deal if someone wants to buy several items. Thanks

Link to comment
https://www.sau.com.au/forums/topic/423728-rb25r33-parts-pfc-injectors-etc/
Share on other sites

  • 2 weeks later...

Make an offer on silver avcr and genuine z32 with plug. Also have .63 internal gate gt30 5 bolt rear housing lying around, $250. Dump/front pipe with screamer 5 bolt flange 250 ono. Custom forward facing plenum mounted on stock runners, bellmouth tubes inside $350 ono.

Just to add to the JJR part, I still have the cross over pipe to suit standard plenum as well. Either way $220 ono and i'll chuck in whatever pipes I got around here lol

  • 1 month later...
  • 1 month later...
  • 1 month later...

Still have stainless dump/front pipe to suit internal gate gt30 (5 bolt) $280. Also have dump/front pipe with screamer to suit stock turbo (6 bolt) $250. Aaand .63 internal gate gt30 rear housing with actuator $250, stainless intake pipe with fitting for bov or catch can $100.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...