Jump to content
SAU Community

96 S2 R33,white,fluro Drift-Teks,hiflowed,power Fc Etc


Recommended Posts

96 NISSAN SKYLINE R33 S2
ENGINE-
RB25DET 2.5L 6CYL
5SPD MANUAL
HIGH FLOWED GCG T28 STAINLESS INTERNALS
TURBO BACK XFORCE EXHAUST, CANNON
NISMO SHORT SHIFTER
YELLOW 555cc INJECTORS
APEXI POWER FC & HAND CONTROLLER
APEXI AVCR ELEC BOOST CONTROLLER
BOSCH 040 FUEL PUMP
GFB ADJUSTABLE BOV
COLD AIR BOX INTAKE
FRONT AND REAR STRUT BRACES

EXTERIOR-
JUST FITTED S2 4DOOR MSPEC FRONT BAR WITH THE DIFFERENT STYLE
FOGLIGHTS,NOW RESPRAYED WITH LOWER LIP FITTED
DRIFT TEKS 17INCH x 9 FRONT, 17INCH x 9 REAR, MULTISTUD 5X114.3 AND 5X100
BRAND NEW TYRES ALL ROUND, NICE STRETCH ON THE FRONTS
PROFFESIONALY RESPRAYED FLURO ORANGE(LIKE A CANDY)WITH A GLOW IN THE DARK COATING(GLOW WHITE)
16% BLACK TINT
SLOTTED FRONT ROTORS

INTERIOR-
NISMO DASH CLUSTER
APEXI TURBO TIMER
FACTORY S2 5 PEICE FLOORMATS
SONY IPOD/ MP3/USB BLUETOOTH HEADUNIT
SPLITS FRONT
6X9s REAR
SOUNDSTREAM,ALPINE AND KICKER AMPS
2 X 12INCH MOUNTED SUBS
AFTREMARKET REMOTE CENTRAL LOCK ALARM/IMMOBILISER/
SHOCK SENSORS/BONNET AND DOOR SENSORS ETC
PLUS ALL THE FACTORY STUFF - DRIVERS AND PASSENGER AIRBAGS,POWER STEERING,POWER MIRRORS,6 WAY ADJUSTABLE LUMBAR SEAT,ADJUSTABLE STEERING WHEEL, CLIMATE CONTROLL, AIRCON, LSD, ABS BRAKES, REMOTE ANTENNA, ALSO HAS BEEN MOD PLATED TO BE A 5 SEATER, A SEATBELT WAS PROFFESIONALY INSTALLED IN THE CENTRE REAR.

THE BAD -
HAS A PRETTY BAD CRACK FROM A STONE CHIP THAT SPLIT IN THE SUN, SO IT NEEDS A WINDSCREEN TO PASS A RWC.($320 fitted by novus)
ALARM REMOTES ARE STUFFED,NEEDS NEW REMOTE REPROGRAMED OR REMOVE ALARM(still starts,unlocks etc)

JUST FITTED SLOTTED ROTORS, NEW HEADUNIT INSTALLED,JUST GOT RIMS ALL RESPRAYED,NEW TYRES ALL ROUND,WHEEL ALIGHNMENT,JUST GOT NEW SPARK PLUGS,OIL and FILTER CHANGED 10/04/13 , NEW TAPPET GASKET,THROTTLE BODY CLEAN AND POLISH, OIL CATCH CAN,REPLACED ALL MAJOR HOSES ETC. HAVE ALL RECEIPTS FOR SERVICE AND MAITENANCE.

HAS 151000KLMS, AIRCON IS NICE AND COLD CAUSE I NEVER USE IT,EVERYTHING WORKS.GHT70 PLATES NOT INCLUDED!

NOT REAL SURE ON POWER ITS MAKING BUT I WAS TOLD EST 340-350RWHP AT 16PSI, I RUN 12PSI EVER SINCE I PURCHASED IT A YEAR AGO.

I'M NOT IN ANY HURRY TO SELL, I STILL DRIVE IT TO WORK 5 DAYS A WEEK AND HAS NEVER LET ME DOWN. ONLY SELLING CAUSE IM BUYING A TOYOTA 86 OR AN S15 IN THE NEXT FEW MONTHS. PM OR MSG (Contact Seller) - ROB.
Price is $10 000neg with 6 months rego,rwc with new windscreen fitted

post-75302-0-45543300-1366276759_thumb.jpg

post-75302-0-62522200-1366276775_thumb.jpg

post-75302-0-32405600-1366276793_thumb.jpg

post-75302-0-89958900-1366276808_thumb.jpg

post-75302-0-88539800-1366276838_thumb.jpg

post-75302-0-99549700-1366276858_thumb.jpg

post-75302-0-87577200-1366276900_thumb.jpg

  • 3 weeks later...

Update- Just had the clutch replaced with a brand new exeedy heavy duty sports, cost $940 for clutch,fitting,also had flywheel machined,gearbox oil has been changed with top quality synthetic. Also the alarms immobiliser has been disconnected until I can find a suitable replacement remote,siren and sensors still work.

  • 4 weeks later...


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...