Jump to content
SAU Community

Recommended Posts

This afternoon when picking up my car, I was asked to try a product called Broquet Fuel Catalyst, or Fuel Booster. I have heard of these things before, and the rep wanted me to try it with no obligations to buy, and see how it goes??? This little gismo steel rod looking thing sits just after the fuel filter. Apparantley the fuel runs through this steel rod which has little magic balls in it, and they charge or do something to the fuel which allows it to simulate an Octone boost, reduces exhaust temps by half, reduces fuel consumption, reduces knocking and allows you to advance timing safely. I'd heard of these before, and was a little suspicious... I mean all this sounded like the similar effect a water injection kit has..but thought so long as it does no harm I'll try it.

First thing I noticed in my GTR, when I watch my knock levels on the Power HC they seem to have dropped considerably, under hard accelleration and high boost I would max hit around 45, but I saw nothing over 35. OK so I'm thinking, luck maybe. Now I haven't driven the GTR for nearly a month, since getting the new gearbox overhaul & Ogura Twin Plate/Flywheel until I picked it up today. But I did sort of notice boost came on a little earlier than normal?? spooling started at less than 3800rpm? I thought this could be attribute to the lightened flywheel?

This boost master thingo, is also supposed to cut fuel consumption "but that's not my reason for trying it?? doh", allows you to advance timing some more etc etc?

I spoke to a mate tonight about it, and he said don't bother, telling me it leans out the mixtures, that's why you save fuel, and also said if I noticed some loss in power? which I replied "yes" I did.. the car's power felt very linear and even, not the standard ooooooh nooo here we goooooo!

So if anyone has some furthe input I'd appreciate it. Please.. no flaming and preferabbly some educated opinions.

Thanks fella's

Link to comment
https://www.sau.com.au/forums/topic/42386-anyone-tried-this-octone-solution/
Share on other sites

i have a friend that works at peps auto parts and he gets a lot of these dud octane booster products. but honestly i think the best is to tune your car on normal premium unleaded so you dont have the hassles of having to always add something to your fuel so you can drive it normally. but if you do want to have some fun then tune your car on c16 and your on your way. 116 octane can be a lot of fun. but at 7.50 a litre its a very expensive fuel. goood luck

One thing that doesn't make sense is if I lean out the mixture's I should effectively have more pinging?? but this doesn't seem to be the case?? I'm buggered why. The guys from OWS Oils who gave this to me, want to meet me down at ICE, and stick the car on the dyno to see the results... I'm having nightmares already, I can hear Nigel and Gerald saying.. "Why'd you even bother" It should be interesting unless they convince me otherwise before then.

hey, if they pay for a free dyno run, why not??

altho if i had a GTR i don't think i'd be letting these sorts of 'pls come try my product, it's great but i don't know why no-one else is using it...' ppl sticking anything it it. Anyways, i've been sold on Roil :(, so maybe this works as well?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...