Jump to content
SAU Community

Recommended Posts

Ikeya Formula Sequential Shifter to suit R32 / R33 Nissan Skyline GT-R and R32 GTS-4, May fit other Nissans like the Z32 300ZX and GTS-T’s as their gearboxes are very similar but can’t be sure.

These are fully road legal with the optional digital shift display that comes with it, so you can see what gear you are in

This changes your standard H-Pattern shifting to a back and forward sequential shift like a race car or a motorcycle. Now before anyone asks, It doesn’t magically make it so that you don’t need the clutch!

It normally comes with only Japanese instructions, But I have managed to get the fitting instructions translated to English.

I had this fitted for a short period of time in the car, But I have decided to go to a full race gear box now that the car is not going to be road legal.

I paid $3350 for it including all the postage and GST to get it here from Japan, So at $2000 for an almost brand new one it’s a BARGIN!!!

Can send anywhere with a PayPal Account at buyers expense

Pics are on my Trade Me Auction

http://www.trademe.co.nz/Browse/Listing.aspx?id=589126881



http://www.ikeya-f.co.jp/images/wmv/sousa2.wmv

Edited by Sub Boy32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...