Jump to content
SAU Community

Recommended Posts

FMIC are an odd one. Most people cut the front bar to fit the pipes. This makes them a nono. If yours is properly fitted with no hacking etc it should be fine.

That's right Sin, if you have changed/modified your chassis to fit a fmic it is defectable but if it fits correctly it is allowed hence the time role have passed through Dickson with fmic. However it the car had a top mount intercooler like WRX's you cannot have a fmic without engineering because your average skyline, Silvia etc has a forward facing intercooler outside the chassis frame oem. Same goes for turbo lasers where they are next to the engine.

I agree and disagree. Cutting the reo bar i agree with being a big no no but when i did it on my old r33 i took the car to a panel beater and ask if there was any issues with cutting a hole in the part near the wheel well and above the chassis to put the pipe through and got confirmation that part of the vehicle if cut will not change the integrity of the strength of the vehicle.

Any one else done the same?

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

I've heard that since I did it. The car hasnt changed and still passes roadworthys.

I think they need to set the rules so that everything is the same.

Somethings are illegal on one vehicle and on another vehicle its legal.

Something to help people with the silly defects given to some modified cars on the side of the road. Namely Noise Tests on the side of the road.... Print this off and ensure that the officer at the time of the test follows the guidelines set out by the National Transport Commission of Australia. Note that this document specifically mentions the allowed equipment for noise tests angles and distances rpm for types of cars etc

http://www.ntc.gov.au/filemedia/Reports/NatStatExhaustNoiseTestSept2006.pdf

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

Did management confirm they HAD invited them? Your post is a little vague there :P

How about a $40 car cover?

They cant see sht then, they cant see rego or number plate.

Just cover your defects and rego when parking.

And some kind of alarm so they cant f&@k with it.

Or tiny locks so it cant be moved without breaking something, and if they do that....... well, you can imagine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...