Jump to content
SAU Community

Recommended Posts

Howdy,

Up for sale the following bits purchased with project car which are no longer required most bits are new and never used unless specified.

I have many R32 and R33 bits available so please PM if its not advertised!

6 x Nismo 600cc injectors (used) mounted in standard R33 RB25 rail and including stock fuel pressure reg.

Straight bolt in for RB25

$600 + post

post-30339-0-07310400-1368437388_thumb.jpg

YELLOW JACKETS coil pack set R33 Series 2 (no ignitor box) - YJ-RB2526-S2

Straight bolt in for RB25

NEW never used - they have been fitted but never fired up. pic is not of actual coilpacks as I didn't get a photo of the actual ones

$350 + post

post-30339-0-93715000-1368437247_thumb.jpg

6 boost genuine steampipe exhaust manifold to suit RB25 (manifold was built to suit RB25 in R32 - compact design - but will be prefect for any R32 or R33 or RB25)

Work of art to Suit RBb25 head stud pattern

T3 flange

50mm v-band external wastegate flange

NEW never used

$1100 plus post these RRP $1400 http://www.horsepowerinabox.com/HPIAB2/prod36.htm

post-30339-0-88544700-1368437413_thumb.jpg

post-30339-0-37650000-1368437432_thumb.jpg

post-30339-0-62371200-1368437446_thumb.jpg

Kando Dynamics KINUGAWA turbo kit T67-25g 10cm (similar specs to a Garrett 3540)

T3 rear and V-band dump 0.63 very responsive on rb20 or 25

Compressor housing: AR70 2.5 inch outlet

Surge slotted front cover for that awesome whistle sound

NEW never used

Results speak for themselves- good for 15psi at 4000rpm and 300+rwkw with supporting mods on a stock RB25 http://www.skylinesaustralia.com/forums/topic/347726-kando-dynamics-turbo/

Comes with all braided lines, t3 stainless gasket, and 90 silicon elbow off turbo. - save the stuffing around as this one is ready to go.

$700 plus post RRP$850

post-30339-0-50259900-1368437497_thumb.jpg

post-30339-0-17984900-1368437510_thumb.jpg

post-30339-0-35432300-1368437525_thumb.jpg

post-30339-0-86765100-1368437539_thumb.jpg

Turbo Beanie

Keep the heat where it should be - suit T25-T3 small T4

NEW never used

$60 plus post

post-30339-0-23225800-1368437562_thumb.jpg

Front mount intercooler 600x300x76

Perfect for the front of any skyline

Finished in black in great condition looks like new, has been used.

$100 + post

post-30339-0-50488800-1368437589_thumb.jpg

R32 GTST Gearbox and tailshaft combo

Has redline oil, taken out of vehicle with 145xxxkms on clock

$500 pickup only will throw in heavy duty clutch for extra $100

R33 series 2 RB25DET engine

Came with project car approximately 110xxxkms

Complete long motor comes with alternator and power steer pump

Ready to drop in just add your bolt ons or purchase mine!

NEW exhaust studs fitted as this was to be used with the above.

$900 pickup only can negotiate more inclusions

Monster K&N filter RE-0860

4"x12" cone filter

NEW never used comes in original box

$40 plus post

post-30339-0-37609300-1368437612_thumb.jpg

RB25 R33 Silicon radiator hoses

Top and bottom hose

NEW never used

$20 + post

post-30339-0-42877100-1368437627_thumb.jpg

16inch chaser wheels set of 4

16 x 6.5, 5x114.3 stud pattern 36 offset

Camber wear on tyres

great drag tyres sit tough on all skylines

$150

post-30339-0-59495100-1368437702_thumb.jpg

RB25 R33 engine mounts

Used good condition

$80 pair + post

RB25 R33 starter motor

Used good condition

$40 + post

post-30339-0-69406900-1368437646_thumb.jpg

Exhaust heat wrap roll

NEW never used

$50 for the roll enough to do manifold and dump pipe.

post-30339-0-12973100-1368437668_thumb.jpg

I also have a range of R33 and R32 bits so PM me if you need anything. Will post more items soon.

Located in Sydney Hills Area prefer pickup will post at buyers expense, all prices negotiable although please no time wasters.

Hey mate are the injectors complete with all the bits to bolt straight in? And have they been flow tested? I'm pretty interested!

Hey mate are the injectors complete with all the bits to bolt straight in? And have they been flow tested? I'm pretty interested!

PM sent - yes they are drop in ! have not been tested,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...