Jump to content
SAU Community

Recommended Posts

are the cops involved/aware of the names? If so, best not to name and shame.

If your handling this in-house - still probably best not to name them, then no-one will notice when they are missing/in a barrel.

yes cops are involved and names have been given with witness accounts as to where the stolen goods are, but still the cops dont do shit, they ring me every week asking if more evidence has magically turned up....I'll never understand the justice system its total bullshit, they are on camera, they have thier names, a witness saw the items in thier house and cops STILL wont go there.

f**king worthless shit, the laws simply protect the f**king crims. If this were where i came from in russia their doors would have been busted down and machine guns shoved in thier face asking where the f*k the goods are.

man this is not good to hear. Hoping that by some luck these crims get caught and you get your gear back.

Being a business, aren't these items covered under insurance?

Yea the items are quite rare, a white carbon fiber bonnet is hard to miss, and work CR Kais that stick out the guards without spacers is even harder to miss so with luck they will be spotted. Unfortunately being a jap wrecker insurance only coveres what's locked up in the shed and simon and myself were getting the car ready for his drift school on the weekend and just forgot to push it back in the shed after some beers.

Lol would love traps but unfortunately it's illegal in aus and the cops seem to prefer helping crims these days

That def sucks if police have an idea of the suspects and wont act on the info....they wonder why people take things into their own hands....I know I'd sure be pissed if it were me.

Goodluck with the outcome, hopefully there's some justice at the end of the tunnel

Yeah it sucks. Things got stolen from me before and the police said they can only knock on the door and ask.

They will need a warrant or if the goods stolen are more than $2 -3k something like that they "say" they can actually do something

They haven't even knocked on his door yet, and the stolen goods all together add up to about 6k with things like the racing seats and harnesses, apexi power fc, z32 afm, new oil catch can with speedflow fittings and lines, hybrid intercooler and piping, work CR Kai wheels, white carbon fiber bonnet a custom fabricated switch panel with switches and gauges.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...