Jump to content
SAU Community

Recommended Posts

the top pippig im really wanting to replace coz as you may see when they put it on it started hitting the bonnet, so i had my mechanic try and lower it as much as he could coz it was rubbing pretty bad

Yep but you will find that is a bigger job than you think as you will need a different intercooler setup etc

yea im just concerned that if it rubs a hole in it im kinda dead in the water

Pack race tape :P Lol, no really you should have the pipe modified to stop the rubbing! Plenty of other cars running that style piping without issues :yes:

yea its lowered now and isnt touching as far as i can tell but if you look at it in real life the way they placed stuff and the cheap rubber piping seems weird. btw a quick qestion with the stock turbos should they constsit with its boost or should it patter out around a certain rmp then kick in again ? or should i have that looked at? lol

first turbo so im still figuring out how it should ride and what it should feel like with the mods he put on it.

i dont know the boost or horsepower yet for sure, need to wait a month to get the cash together to put it on the dyno and have it serviced. but from what the guy i got it from he said it was 187kws and boosted to 14 psi and after a fortnight of driving it i very much doubt that is real.

yea im taking it to millennium motorsports and putting it on the dyno there and he said he would make sure its boosted safely and rework the boost for different gears so i dont get 14 psi on first gear etc. so im hoping that will fix her. apart from that shes a great car even has the factory sunroof =). clean inside just need to remove that pink crap from the skyline on the back and pull off the gtr badge.

yea im taking it to millennium motorsports and putting it on the dyno there and he said he would make sure its boosted safely and rework the boost for different gears so i dont get 14 psi on first gear etc. so im hoping that will fix her. apart from that shes a great car even has the factory sunroof =). clean inside just need to remove that pink crap from the skyline on the back and pull off the gtr badge.

Lol well report back with how it all goes mate!

Gotta go, talk later!

Fix the weak spot. turns out the turbo smart machanic boost controller was stuffed and pissing out pressure, running like a dream now all thanks to cyifly from these forums meeting up and having a look at her for me. awsome guy and god damn his car is a BEAST! lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...