Jump to content
SAU Community

Recommended Posts

hey guys got heaps of RB20/RB25 NEO R32 GTST/GTR parts send me a msg of what you need.
a few things.

RB20DET
-RB20 Stock Turbo Intake Pipe $50
-RB20 Stock Turbo Heat Shield $30
-RB20 OEM nissan clutch slave cylinder good working cond $50
-RB20 clutch lines (missing master > dis block) $20
-RB20 stock exhaust cam $30
-RB20 stock fuel rail (painted red) $30
-RB20 stock injector plugs (pigtails) $30
-RB20 stock head bolts $40
-RB20 stock throttle body $40
-RB20 IAC valve $30
-RB20 knock sensors $40
-RB20 Harmonic Balancer $60
-RB20 water pump pulley $20
-RB20 thermostat housing $20
-RB20 power steering bracket $20
-RB20 CAS bracket $20
-RB20 Alternator bracket and adjuster bolt $30
-RB20 exhaust manifold heat shield (gd cond) $20
-RB20 engine mounts $50
-RB20 flywheel needs a machine $50
-RB20 flywheel bolts (gd cond) $30
-RB20 coolant hoses $50
-RB20 stock thermostat (gd working cond) $30
-RB20 starter motor $80
-RB20 sandwich plate $30
-RB20 stock cam gears $40
-RB20 front cam gear cover & t belt cover $50

RB25DET NEO
-RB25det neo bare block in gd condition (still has origional cross hatching) $350
-RB25 neo crank in good condition $300

-crank + block together $550

-RB25 neo valve covers $80
-RB25 neo harmonic balancer (has small chip missing from centre) $100
-RB25 neo plenum (top and bottom) $150
-RB25 neo manual loom stagea has a couple of cut plugs $100
-RB25 neo stock throttlebody (no traction control) $70
-RB25 neo standard turbo intake $30
-RB25 neo ecu Temp sender $30
-RB25 neo gauge temp sender $20
-RB25 neo TPS $70
-RB25 neo timing belt covers (top and bottom) $80
-RB25 neo Flywheel needs machining $50
-RB25 neo clutch bolts $30
-RB25 neo powersteering pump & bracket $150
-RB25 neo crossover pipe $50
-RB25 neo thermostat (good working cond) $20
-RB25 neo engine mount brackets $80
-RB25 neo engine mounts $60
-RB25 neo stock injectors (370cc top feed high impedance) $70
-RB25 neo injector loom $30
-RB25 neo stock oil filter warmer/cooler $80
-RB25 neo 4wd sump and diff $150
-RB25 neo clutch fan (unhacked) $100
-RB25 neo auto sandwhich plate $20
-RB25 RWD oil pickup $40
-RB25 manual gearbox crossmember + mount $70

R32 GTST PARTS
-R32 Nismo struts (set of 4) $400
-R32 Stock Rear Camber Arms $70
-R32 Stock Castor Rods (urethane bushes) $80
-R32 coolant overflow bottle lid $15
-R32/33 drivers side power window relay (good working condition) $80
-R32 bottom half of stock air box $30
-R32 boss kit $40
-R32 rear hicas rack (no tie rods) $70
-R32 rear hicas solenoid $30
-R32 5 Bolt Drive Shafts L+R $80ea or the pair for $150
-R32 R200 5 Bolt Half Shafts $70
-pair of driveshafts + halfshafts $200

R32 GTR PARTS
-R32 rear ABS Actuators $70
-R32 rear handbrake lines x2 (rear sections) $80
-R32 rear hicas rack (with tie rods) $100
-R32 rear knuckles $150
-R32 rear upper control arms $70
-R32 rear lower control arms $100
-R32 rear traction arms $50
-R32 rear subframe (bare) $350
-R32 rear subframe (with arms) $500


GENUINE NISSAN RB GASKETS (brand new)
-RB20 middle plenum gasket (14032-72L01) $15
-RB20/25/26 oil pump gasket (15066-71L00) $20
-RB20/25 oil filter housing gasket (15239-71L00) $10
-RB20/25 bov gasket (14489-05U00) $20
-RB20 plenum waterpipe gaskets $30
-RB20 idle air control gasket (23785-40F00) $20
-RB20 oil pickup gasket (15053-1E400 ) $15
-RB20/25 dump pipe gasket (14445-V2700) (used) $15

-Z32 AFM PLUG $20
-set of 6 bosch ev1 pigtail plugs $25
-bov trumpet type with adapter $70
-2x HKS SQ Bovs $70ea
-R33 na front stub axles and upper control arms $50
-Bosch 044 billet silver fuel pump bracket $25
-Rockford fosgate 12'' sub in ported box $200


heaps more parts just ask..

LOCATED IN SOUTH AUSTRALIA (Can post at buyers expense)

Nathan 0431048440

R32 GTR Rear Cradle
includes
-hicas rack, rear lines and solenoid
-all arms (toe, traction and lower and upper control arms)
-aluminuim knuckles
will seporate parts if interested

$500

2714fec20.jpg

R32 GTST/GTR Alloy Radiator dual core 52mm custom jap made, came off a R32 GTR Drag car, custom stainless shroud and 400mm genuine Spal 3000CFM Thermo fan.
more info on the thermo
16" Curved Blade Extreme Performance Fan / 12V Puller 3000CFM

$500

20130601170619.jpg

20130601170625.jpg

20130601170641.jpg

R32 GTST Nismo Suspension has low king springs on the rear sits nicely in the car
have been through regency with them on so not to low. in good working condition

$400

14966mb20.jpg

25129bj20.jpg

RB25 neo harmonic balancer (has small chip missing from centre)

$100

860322820.jpg

RB25 neo stock injectors (370cc top feed high impedance)

$70

74269b720.jpg

R32 rear handbrake lines x2 (rear sections)

$80

6497i7e20.jpg

RB20/25 flywheel bolts (gd cond)

$30

20120903170842.jpg

R32 Stock Castor Rods (urethane bushes)

$80

7920m0a20.jpg

R32 Stock Rear Camber Arms

$70

7706ah320.jpg

R32 R200 5 Bolt Half Shafts $70
-pair of driveshafts + halfshafts $200

0101df120.jpg

20130526121437.jpg

bov trumpet type with adapter

$70

4875gb820.jpg

2x HKS SQ Bovs

$70ea

7714ldb20.jpg

Z32 AFM PLUG

$20

20120114140942.jpg

things sold so far.

-RB20 idle air control gasket (23785-40F00)

-RB25 neo valve covers

-RB25 neo crossover pipe

-RB25 neo engine mount brackets

-R32 5 Bolt Drive Shafts L+R

-RB25 neo stock injectors

i also have

-RB26 Clutch Fan and Hub in good working condition $100

-SR20 Fan Clutch hub in good working condition $50

things sold so far.

-RB20 idle air control gasket (23785-40F00)

-RB25 neo valve covers

-RB25 neo crossover pipe

-RB25 neo engine mount brackets

-R32 5 Bolt Drive Shafts L+R

-R32 R200 5 Bolt Half Shafts

-RB25 neo stock injectors

-R32 Stock Castor Rods (urethane bushes)

things sold so far.


-RB20 idle air control gasket (23785-40F00)


-RB25 neo valve covers


-RB25 neo crossover pipe


-RB25 neo engine mount brackets


-R32 5 Bolt Drive Shafts L+R


-R32 R200 5 Bolt Half Shafts


-RB25 neo stock injectors


-R32 Stock Castor Rods (urethane


-RB25 neo powersteering pump & bracket


  • 4 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...