Jump to content
SAU Community

Recommended Posts

Hey everyone, I'm John, 21 and from Christchurch New Zealand.

I have owned a few nissans, a couple of R32's, two p11 primeras, Sr20de+t s14. Currently own (and will never sell) this R32 4 door, which I've owned for four years. It's being built for casual drift days. It's been sitting in my shed for over two years and I've only used it once or twice in that time so she's a slow build. Plan is to get a tune in over the winter then get some seat time and a 6 point cage

011edited-2_zps8828f632.jpg

029_zpsb9c6ff52.jpg

003.jpg

I'll put up a build thread soon along with another thread for an S13 that I'm fixing for my flatmate.

Link to comment
https://www.sau.com.au/forums/topic/426267-another-kiwi/
Share on other sites

Motor-

Rb20det

3" stainless exhaust

High flowed Rb25 turbo, tail 38mm gate

kelford cams and cam gears

Rb26 injectors

Cooling-

Davies and craig powersteering cooler

60mm alloy radiator

13 row oil cooler

front mount

Suspension/brakes/handling-

Shitty old D2's

Front camber and caster arms

Rear traction and camber arms

still four stud, but had 4/2 pots ebc yellows

braided brake lines

subrfame collars

GTR rear sway bar

nolathane bushes

tomei 2-way

All sound proofing removed

A/C revoved

Most of the interior is stripped

Fuel-

walbro 225 in-tank

alloy 2 liter surge tank

-6 braided line

044 external pump

Link to comment
https://www.sau.com.au/forums/topic/426267-another-kiwi/#findComment-6875747
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...