Jump to content
SAU Community

Recommended Posts

Selling off lots of parts as building up a new engine and car out of my gtr32

Garrett 2860 -10's with standard dump pipes I believe they are, one is damaged at last track day, looks like it needs a new core, exhaust compressor housing but haven't pulled it apart. $900

Splitfire coil pack hardly used but had it for some time. 300

Gtr32 cold air intake polished kit with apexi pods, 300

White line sway bar. 100

Factory g sensor. 250

Power steering pump and reservoir 100

Oil catch can and breather kit, 300

Apexi turbo timer 40

Hks blow off valves, told they are sqv, need a clean though. 270

Tomei cams A2691N stamped, told they are 260 9.1 lift. 500

Standard plenum with throttle bodies. 250

Ignition coil pack 100

Driftworks solid conversion bushes- s13/r32 to s14/r33/r34, these are brand new in box direct from uk unused, paid over 200 to get em, 100

Abs unit also for sale but not sure on price yet.

Feel free to email me or private message. [email protected] same parts are negotiable but first in will sell as I have placed them else where for sale too

post-19978-0-77483900-1370650608_thumb.jpg

post-19978-0-08800900-1370650639_thumb.jpg

post-19978-0-16665500-1370650667_thumb.jpg

post-19978-0-76875800-1370650692_thumb.jpg

post-19978-0-37313200-1370650720_thumb.jpg

post-19978-0-92239200-1370650939_thumb.jpg

post-19978-0-86762700-1370651012_thumb.jpg

post-19978-0-52633100-1370651044_thumb.jpg

post-19978-0-37589600-1370651253_thumb.jpg

post-19978-0-43644400-1370651305_thumb.jpg

post-19978-0-50097800-1370651553_thumb.jpg

post-19978-0-68505100-1370653102_thumb.jpg

Edited by stevena
  • Like 1

Will drop the turbos to 800

And hks blow off valves to 200,trying to price things to sell quickly and open for offers if they seem to much.

If purchasing pick up is from Melbourne 9-5 business hours availability, or I can send items anywhere at your cost. These parts were off my old engine and set up and aren't being used with the new set up. All parts are in working order and good condition unless specified like the turbo for example, thought that might help as I'm getting many emails asking.

Cheers guys.

Edited by stevena

price drop turbos now 500

Gtr32 cold air intake polished kit with apexi pods, 200

White line sway bar 50

Factory g sensor. 180

Power steering pump and reservoir 80

Oil catch can and breather kit, 200

Apexi turbo timer 20

Hks blow off valves, told they are sqv, need a clean though. 200

Tomei cams A2691N stamped, told they are 260 9.15 lift. 500

Standard plenum with throttle bodies. 200

Both turbos damaged? How many kms on them? Street or track use? How much psi has been through them?

Both turbos damaged? How many kms on them? Street or track use? How much psi has been through them?

Only one damaged, needs to be pulled apart to know exactly what is the issue. Other turbo is working fine. Only reason for not fixing it up and putting it back on car is we have gone to a single conversion set up. Only track use, bout 20 track days in total at 21 pound max boost, last track day when it blew was 26 pound for 2 laps.

Price drop, even open to offers so pm if your interested but don't think the price is right, as i don't like things sitting around and cash can go back into the new build.

Gtr cold air intake polished inlet with apexi pods 160

Oil catch cans and breather kit. 150

Standard plenum with throttle bodies 150

Power steering pump with reservoir 50

Turbos 470, one turbo is in perfect running order, the other looks like it needs a new core, exhaust and housing compressor.

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...