Jump to content
SAU Community

Tomei Dump Pipes & Apexi Power Fc - Bnr32/bcnr33

R33
 Share

Recommended Posts

R33 Community Regular

R33

Posted
Posted (edited)

Time to clear some space in the garage, so a few of my parts have got to go

First up is one set of used Tomei Stainless Dump Pipes for RB26DETT

These are the highly sought after earlier version from Tomei, which are stainless and much larger than the current Expreme model.

These were pulled off a car and have since been sitting around for some time, so I was going to have them high temp coated, however my circumstances have changed and I no longer require them so I want them gone.

Priced for a super quick sale, no offers, no low ballers.

$395.00 firm

Second is an Apexi Power FC for R32/R33 GTR (No Hand Controller)

This is a backup ECU so I have kept it on hand as a spare but once again it is no longer needed so I want it gone.

$500.00 firm

Both items located near the northern beaches in Sydney and postage is available if needed.

Thanks.

Edited by R33
R33 Community Regular

R33

Posted
  • Author
Posted

I believe they are around 75mm -

The newer versions are only 68mm

what's your contact? what's the measurements of the dumps thanks. mms me pics of dumps to 0431555509.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...