Jump to content
SAU Community

Recommended Posts

But i changed my G/B oil twice to fix it cos the amount of metal i found in the box was crazy. first time acted as a flush....

thats what i did as well, got the oil changed, then a few months later changed it again and put in the nulon g70. the 2nd time i did it the oil actually was still quite dirty, maybe from stuff in the gears. but now its fine.

o/k it looks like you might be up for one grand. But another way to do this might be to get another gearbox from an import wrecker, he might even give you a discount if you give him your old gearbox.

Most import gearboxes were working perfectly right up the instant of the BIG ACCIDENT, so should be fine in your car. The wrecker will probably sell your stuffed gearbox to a gearbox reconditioning place. They will strip it, for parts, and charge the next customer for new parts (yeah I know !)

It might save you heaps. The worst thing that can happen is your new gearbox also has a problem. In my experience import wreckers will take it back and give you another one. But be sure to get this in writing.

Well... as of last night I think the problem is worse than first thought... with the clutch anyway. The gearbox seems to be behaving itself now.

The clutch on the other hand isn't. Last night while just accellerating in 4th on the highway to get to the speed limit the car went a bit funny like revving and not going anywhere...

Then got onto the main road and accellorated again not thinking of what happened before.. but it happened again.

Do this mean my clutch is absolutely and utterly rooted??

And if so, should this problem be fixed sooner than we thought?

What happens when they start to slip under load is that there is terrific heat generated from friction. The tiny bit of clutch material that is left wears extremely rapidly, leaving you stranded on the side of the road.

It probably has a few short trips left in it though, just do not let it slip. Drive like a little 200 year old granny. If anyone blows their horn at you, just give them the finger !

Arrange something with your local happy smiling mechanic first thing tomorrow.

yups, same thing happened to me wen i had my celica. clutch was slipping and i didn't realise, still kept trying to rev it wondering why it didnt move hehe. would b reving it past 3000 rpm and the car would accelerate so slow :D

but then i just took it real easy on the clutch and kept going with it for a few weeks until i had cash to change it.

perhaps u should do the gearbox and clutch at same time to save some labour costs.

Guest Boxhead

erin dave here,

same thing happened in our old WRX. Was slipping a bit, and organised to get it replaced the next week. At the end of the week was driving it down the driveway when the car just decided not to move at all. Had to get it taken up on a truck. I would get something done asap or you will find your self stranded somewhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...