Jump to content
SAU Community

Recommended Posts

Asking $5500 firm

Wasn't about to trade it in for the $2000 dealer asking price, and I'm not asking for full blow retail $ either.

Travelled 103,XXX Kms, Very clean and tidy car the interior is spotless, no rips or stains, body straight and paint in very good condition, has scratches on the bumpers as expected.


The car has served me well for the past 7 years, however as the family has grown so has the need for a station wagon, which I just purchased.


Aftermarket items:
Electronic cruise control - Command AP500 Recently put in cost $650
Alarm & immobilizer
VDO Boost gauge
Turbotech boost valve running 9 psi
JJR front/dump pipe

Minor issues:

ABS relay sticking in the on position, (will try to sort out prior to selling)

removed AAC valve to clean and lost the o ring and haven't had time to search for another one as a result occationally hunts for revs when cold.

I have a set of 18" 350Z wheels with 235 40 18 HTRZ3 tyres with plenty of tread that can be negotiated at an additional cost.

I won't be getting a RWC due to a lack of time and the low price.
NO RWC
Remaining rego will be cancelled.

Can't seem to add photos due to size of the files so I am additng the carpoint link as reference.

Carpoint add link:

http://www.carpoint.com.au/all-cars/private/details.aspx?R=SSE-AD-2298203&Cr=30

If you want to ask any questions PM me.

Thanks for looking.

Link to comment
https://www.sau.com.au/forums/topic/430500-1997-r33-gtst-auto-sedan-5500-firm/
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

hey man sold mine with rwc and decent sound system ($1000) for $3500 cash but it was a 1995 model, and slightly more kms. I think you have it up for a pretty fair price. Good luck with the sale I miss mine :(

Thanks Mate,

Felt the same way when I got rid of my first r33 coupe in 05, missed it so much I went from a brand new xtrail to this r33 sedan. Just purchased an my06 xt forester so have power and size which is a good compromise. Not quite skyline territory but can't complain as the car is mint with 52K only, and with a few mods down the track will be more fun to drive.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...