Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Wow, much fail, such broken

Many sads were had :(

On a different note, fastest times of the 4 runs:

  1. Daniel Reardon 0:56.5941
  2. Ben Duncan 0:56.8389
  3. Adam McLeod 0:58.1254
  4. Paul Mienert 0:59.0399
  5. Jon Consoli 0:59.5764
  6. Alex Bradford 1:00.9891
  7. Noel Teelow 1:01.1596
  8. Dan Rule 1:01.2492
  9. Jackson Madders 1:02.2065
  10. Greg Sutton 1:02.5287
  11. Sarah Lawson 1:02.7827
  12. Dylan Bigg 1:03.0922
  13. Michael Cadman 1:03.2892
  14. Courto Cowan 1:08.4993
  15. Joshua Jones 1:087293
  16. Captain Slow 1:11.2470

Right where you wanted to be Cadmoon. Well done!

Thanks, yeah I was quite happy with it. Next step now is suspension work then some more power. I almost cracked 1:02 on the 5th session.

Many sads were had :(

On a different note, fastest times of the 4 runs:

  • Daniel Reardon 0:56.5941
  • Ben Duncan 0:56.8389
  • Adam McLeod 0:58.1254
  • Paul Mienert 0:59.0399
  • Jon Consoli 0:59.5764
  • Alex Bradford 1:00.9891
  • Noel Teelow 1:01.1596
  • Dan Rule 1:01.2492
  • Jackson Madders 1:02.2065
  • Greg Sutton 1:02.5287
  • Sarah Lawson 1:02.7827
  • Dylan Bigg 1:03.0922
  • Michael Cadman 1:03.2892
  • Courto Cowan 1:08.4993
  • Joshua Jones 1:087293
  • Captain Slow 1:11.2470
the top five drove what cars Mouse?

Thanks, yeah I was quite happy with it. Next step now is suspension work then some more power. I almost cracked 1:02 on the 5th session.

good stuff - I thought you had pulled out?

I am, I would have gone out to see everyone today but I had to work unfortunately, but looking to send my 31 to Chris very soon to sort out this silly problem with it and have it on the road when I get my tax back

Thanks, yeah I was quite happy with it. Next step now is suspension work then some more power. I almost cracked 1:02 on the 5th session.

Sweet. A little more power and a few of the right suspension mods will see you close to a minute.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...