Jump to content
SAU Community

Recommended Posts

1991 BNR32 GTR with a little over 100K (original) on the clock in Gunmetal Grey. All modifications fully engineered and road registered.

RB30 block conversion (increasing capacity to 3.1lt) is putting out an easy and reliable 330Kw at the wheels at 16psi. It has so much torque currently (over 800nm) I have not bothered boosting more. The Garrett GT2860r-5s turbines spool extremely quickly with minimal lag. With a fuel system rated for 24+psi, 400KW ATW is very achieveable. The suspension is superbly sorted and this must be one of the best handling cars I have ever driven. The TEIN Superstreet struts are one of the most supple for distance driving and can quickly be firmed up with in-cabin dampener controller. Equally the HKS ATTESSA controller gives full in-cabin control of the 4WD. You can put all the power to the back for drift sessions or balance 50/50 for wet canyon driving. The CUSCO 2-way rear diff gives extremely smooth control of the tail when drifting. The cabin has dynamat body soundproofing and the HKS Superdragger exhaust is regarded as one of the quietest of the ‘full power’ exhaust systems making long road trips comfortable. The massive 6 pot brakes are really overkill for road driving but great for track days. The 8lt racing sump and special oil pressure regulator for extreme G-force cornering ensures you will drive the car home from track days rather than on a trailer!

I am looking for $25K firm.

Contact

Andrew

0401291436

[email protected]

The car runs fine however and I drive it to work most days.

Here are the specs.

POWER TRAIN

Bottom End (new motor 7K km ago)

RB30E Series 1 block, decked level to 0 deck height, acid dipped, pressure tested and bored to 87mm.(3060 cc)

RB30E Series 1 crank, balanced and micro polished, fitted with JUN oil pump drive extension.

Nissan N1 oil pump

Nissan N1 water pump

Standard rods, shot peened.

CP 87mm forged piston set, balanced with CP chrome-moly ring set. 8.5:1 compression height flat top pistons

ACL racing bearing set

RB30 ARP main stud kit

Full Nissan gasket kit

Fitzpatrick AWD sump adapter

Custom sump with TOMEI baffle

Custom oil surge pressure tank

Top End

Reconditioned RB26 head with new valves 7K km ago.

ARP head stud kit

Tomei Poncam ‘B’ 260 duration in/out - 9.15 lift

1mm Tomei metal head gasket

1.2mm oil restrictors

Auxiliaries

Garrett GT2860r-5s turbines

X-force HKS-style split dumps and extractors

Aftermarket front pipe

HKS SuperDragger cat-back exhaust

CATCO 5" metallic cat

SARD 700cc injectors

SARD in-tank fuel pump

TOMEI fuel pressure regulator

Custom oil catch can with smaller battery

Cooling Pro 600 x 300 x 100mm fin & tube FMIC

Twin Blitz blow-off valves on custom rail

D-Link ECU

Profec -B-Spec. II Boost Controller

Splitfire igniters & earthing kit

Custom ARC-style air intake box

HKS adjustable cam gears

ARC radiator diffuser

ORC twin plate clutch

Cusco RS 2-way mechanical rear differential

Reconditioned gearbox (9/06)

NISMO radiator and oil caps

BRAKES & SUSPENSION

Stock front brace, Kansai racing rear brace

NISMO front circuit link & upper arm set

CUSCO adjustable tension rod set

Kansai racing lower brace bar set

ARC front and rear hollow stabilizer set

Front & rear roll centre adjuster kit

NISMO rear lower arm set

Pillow ball adjustable rear upper arm set with dust caps

HICAS lock bar with all hydraulics removed

Aluminium rear sub frame lower bushings

TEIN Super Street (Japan spec) coil over suspension (with EDFC control)

G4 356mm slotted front rotors with 8 spot calipers & SS lines

Brembo 320mm N1 rear rotors& calipers with S/S lines

OTHER ELECTRONICS

DEFI Link boost, water & exhaust temp in triple dashpod with glovebox mounted controller

APEXI Turbo timer/A/F meter

TEIN EDFC damper controller

HKS ATTESSA controller with Drag Option (very rare)

Mongoose Immobilizer Alarm

INTERIOR

Tinted rear and side glass

R33 GT-R front seats

NISMO steering wheel and shift knob

SONY CDXGT150 CD/Tuner

6" 190W door and rear shelf speakers

Pioneer SSW104D Slim-line 10" Subwoofer in custom trunk box

Pioneer 230W 4 channel bridgeable Amp

Dynamat Extreme sound-proofing in rear half of car

EXTERIOR

NISMO front bar with N1 vents

N1 side-skirt and rear pods

Carbon fibre bonnet with clips

Custom front lower lip

Ganador replica carbon fibre style mirrors

R34 GT-R rims with 265/35s tyres (nitrogen filled)

Alloy wheel and lock nuts

LED reverse, park and plate lights

Nissan fog lights

Fiamme air horns

There are a few niggles that need sorting

Issues that need sorting;

  • Parking rubs on 1 corner
  • A little gutter rash on 2 rims
  • Carbon Fibre bonnet needs crack repair

More photos to follow

post-31511-0-13442400-1379163116_thumb.jpg

post-31511-0-71504200-1379163145_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...