Jump to content
SAU Community

Australian Tarmac Rally Championship: Snowy River Sprint (23-24 November)

Longinus

By Longinus,
in Archived Events

 Share

Recommended Posts

Longinus Community Regular

Longinus

Posted
Posted

Any of you guys want to come do this?

I did Round 2 at Lake Mountain and had an absolute blast (driving at over 160km/h in tight twisty roads!)

I am helping the organizers get some numbers for the touring event. This is basically like a cruise, but with unrestricted speeds on closed public roads (no cars and no police!!).

This one is on November 23-24 and for $600 you get unlimited driving and a cocktail party!!

Any vehicle is welcome, it can be a complete rally car, track car, street car or even a stock car!

All you need is a AASA license (which you can get on the day for $50) and a helmet.

A navigator/passenger is not necessary at all.

Download the entry form

(watch this to see what the event is all about)

Australian Tarmac Rally Championship website for more information

1175356_10151820542921543_2026220863_n.j

AC1200 Contributor

AC1200

Posted
Posted

sounds awesome, definitely on the to do list

can log booked race cars go in the touring category?

and how do the transport stages work with unregistered vehicles? do they need to be trailered?

  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...