Jump to content
SAU Community

Brisbane - Honda Prelude Si 4Ws $2,500

kawasakirider
 Share

Recommended Posts

kawasakirider Grand Master

kawasakirider

Posted
Posted
Hey everyone, up for sale is my 1992 Honda Prelude SI. The reason for sale is that I have too many cars and I'm trying to thin the fleet out to some degree.


The car drives absolutely fantastically for its age, it's got as little road noise as a late model car. Very impressive. The body on the car is extremely straight with no damage and all of the electric options such as sunroof, electric mirrors and everything else work flawlessly.


The car has brand new tyres along with brand new brake pads, and, if necessary I can supply a RWC at the buyers expense ($80).


There are two minor issues with the car, the first being a missfire while driving, this is due to either the distributor itself or the leads. I haven't looked.


The second being the clear coat on the drivers side front guard peeling.


Other than those two minor issues, this is an honest car going cheap. A great little sporty vehicle for someone's first car or a Honda fan who wants to spend some time making it their own.


Please see attached pictures:


prelube1_zps364f33ab.jpg


prelube2_zpsdb93e8cc.jpg


prelube5_zps7bb2a08e.jpg


prelube4_zpse7dae476.jpg


prelube3_zps818cbea9.jpg


Quarter panel paint:


prelube6_zps51af65e0.jpg



The car is located in South Brisbane and is available for viewing immediately, please contact me (Trent) on 0401029817, cheers!
Link to comment
https://www.sau.com.au/forums/topic/433130-brisbane-honda-prelude-si-4ws-2500/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...