Jump to content
SAU Community

Recommended Posts

Hi guys,

I have a R33 rb25det series 1

Car is making close to 300rwk pump 98

Mods are,powerfc,850cc injectors, upgraded fuel pump, hypergear turbo ect..

Car is on 19 psi boost level and tuned at status

I have a bad hesitation and misfire at wot.

ill do my best to describe the problem.

As soon as I accelerate to full throttle and gear change/putting gears together from 1st to 2nd or even between shifting 2nd to 3rd it will hesitate and miss fire between 5000/6000 pull u foward and then clear up away it goes all the way to redline

When I just go full throttle in the one gear either 1st ,2nd or 3rd gear without putting gears together theres no problem, just clean smooth all the ways through to redline.

If the car gets wheel spin while shifting hard between 1st to 2nd gear it will do it slighty but when it doesn't get wheel spin it just pulls you forward/hesitates and misfires and just clears up after 6000rpm all the way to redline.

Spark plugs are bcpr7es pre gapped .8

Yj coil packs but picked them up second hand and 2 serial numbers on the coil packs are the same and the other 4 serial numbers are all the same so makes me think they have been changed and they should be all the same serial numbers so could be dodgy coil packs sold to me as Ive had them for 18 month now.

It has been doing it to me from a lot of turbos/set ups ive had on the car but I have noticed even when I had a old ebay turbo on as well 6month ago or so it would do it at high boost but as soon as i went to around 12/13 psi perfect can shift hard between gear and perfect no hesitation or misfire so not sure if its my coilpacks or plugs maybe to cold or gapping to .65/.7mm will help and maybe blowing out the spark between gear shifting at wot.

Will be getting brand new splitfires in the next few weeks but just wanted to ask and see if anyone has seen/heard of a similar thing with there rb25det.

Any help would be great.

Edited by RamR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...