Jump to content
SAU Community

Recommended Posts

so my dr30 is now 30 years old and i want to historic rego it but i cant with the 26/30 engine, so it has to go.

engine specs:

tomei pro cams 270 deg 11.5 lift

tomei type b springs

retainers

head clearenced and serviced

all new shims to suit cams

hks inlet gaskets

tomei exhaust gasket

mines rocker cover baffles

tomei oil restrictors

new genuine seals

standard cam gears

high octane belt

tensioner stud moved to above waterpump

new idlers

rb25 balancer

wrinkle painted plenum

subaru silver rockers

nismo thermostat

custom coolant bypass pipe

custom coolant breather setup

acl multilyer head gasket

bottom end is normal rb30

last time i comp tested it (3weeks) ago

140 140 140 135 140 140

can can still be seen running

you can come comp test it if u dont believe me, remember with 26/30s low comp engine so 8.0- 8.1

sydney

motor is still in car and i have

6 boost mani and other stuff but i dont want to sell until engine is sold

can do a combo if wanted.

$3800 neg for engine,

please if u are genuinely interseted call me, happy to add more to this when i remember more.

motor is solid, im only selling for the one reason that i want a fj2o back in this car.

0419469108

2h4yf48.jpg

  • Like 1

turbos a normal gt35/82 r w .82 rear. used twice. same with manifold

motor is sold to fatz pending comp test

if fatz pulls out will put up a combo price but id rather seperate it all to try re coop "some" of the money spent on this thing

  • 2 weeks later...

engine sold!!!!

I have gt35/82 r .82 rear

6 boost manifold t3 open

50mm turbosmart gate w 14pound spring

can do a combo or sell separate

$1000 6 boost

$$1300 gt35r

$500 50 mm

all above are like new used for a dyno run. 2 hours of drifting and a wsid night

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...