Jump to content
SAU Community

Recommended Posts

Hi Everyone,

I am new to the forum, and stumbled across this forum while contemplating if getting a R35 would be the right choice of car for me. I don't have a abundant knowledge of the car other than the typical (Most bang for buck supercar) out there.

Unfortunately price is always a factor when purchasing cars (At least for most people :no:) (especially when it is purely going to be a weekend toy). My budget would probably be around $100K to $110K.

I have heard some notorious stories about the running cost of these beauties, but had recently test drove and talked to a dealer about it. Not sure if this is entirely true but from what he says, the cost have come down dramatically, mainly because of after market stuff. E.g Brake and disc replaced no longer cost $6000, more like $2500. And tyres are around $2000 for a full set. This is obviously a huge factor to take into account before the taking plunge.

Something they had offered which was quite appealing to me was that they had the extended warranty packages up for purchase, which covers all the original manufactures warranty. Though the question then becomes, if you start installing all these after market parts, does it void all the warranties.

Lastly, if anyone can share any insight experience in what to look for when purchasing a second hand R35. E.g Tyres, brakes, logbook, etc.

Regards,

Link to comment
https://www.sau.com.au/forums/topic/434155-looking-to-learn-more-about-gtrs/
Share on other sites

Installing after market performance parts will void warranty.

You just don't want to pick one up that had been heavily modified and brought back to stock.

If you get a transmission problem with no warranty your talking 10's of thousands I think..

READ the warranty PDS, as i deal with it allot in my work, generally any aftermarket parts are not covered by warranty, depending on the conditions this does not usually VOID a warranty however if you have a failure due to your modifications then you are out of luck.

this is up for interpretation, not your interpretation btw so be careful.

but if you fit different brakes and your ECU dies, then its not going to be linked is it.

READ the PDS.

A wise man ounce told me if your buying a performance car to afford to keep it running you must be able to buy 2 of them.

Its like any car, you get some really tough ones, then you get some real lemon's.

Of course when it comes to modifying you got to totally ignore the warranty as they will totally ignore you.

I have seen some in that price range from dealers so I think you can get your hands on one with no mods.

If your looking for some thing with a little more ponies though,

I think you will have to spend a little more, cost of car and maintenance.

Edited by Bubbles

Thanks for the feedbacks,

Its definitely food for thought, starting to sway to maybe getting one and scrape all these warranty business. Seems the better option is to fiddle with the car and have mods instead and if things do go wrong, order better parts to replace it lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...