Jump to content
SAU Community

Recommended Posts

As per title, have an R31 Silouette GTS1 (SVD build 044) for sale. (http://wiki.r31skylineclub.com/index.php?title=R31#GTS1)

In good nick for age, and mostly original (has a pod and aftermarket stereo and immobiliser - but I still have the factory airbox)

These cars had upgraded cam, bilsteins, lowered, brakes, extractors/exhaust, wheels, seats.

It was unregistered for 3 years before I owned it, just been re-registered. Selling as I want something more appropriate to transport kids/daily driver.

Slightly notchy into first gear, has a short sifter also, and I believe it may be a R32 gearbox (speedo reads a bit low, and it had a RB20 in it for a while, so I was told)

Engine is still in great nick, doest blow smoke or have any issues - car drives and handles great, amazingly nimble and well planted for a car which is 25 years old. Still has original GTS1 owners supplement in the glove box too :-)

Looking at around 6K - or may consider swaps. Would suit enthusiast or collector, very rare car.

No time wasters please.

SMS 0417 116 919

Link to comment
https://www.sau.com.au/forums/topic/434220-r31-gts1-build-44-of-200/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...